Metal Faced Insulated Sandwich Panels

Metal faced insulated sandwich panels

The full name of metal faced insulated sandwich panels is "metal-faced waterproof and energy-saving decorative integrated board". It consists of three parts. The surface is made of special-treated aluminum-zinc steel plate; the middle layer is rigid foamed polyurethane, which is also an insulation layer; the bottom layer is made of aluminum foil. Paper or glass fiber cloth, play the role of moisture-proof and heat insulation. Its color and texture are diverse, it will not fade for more than 15 years, and it is highly decorative.

The exterior wall coatings are generally water-based coatings and solvent-based L-type coatings. The texture of the exterior wall paint is poor, and the life is short, and it is easy to peel off after a long time. It usually takes less than five years to re-clean and re-brush.

Parameters

Features and Advantages

Green and durable:

Metal faced sandwich panels has stable chemical and physical structure, will not decompose mildew, no radiation, no pollution, green environmental protection. The plate can also be flexibly disassembled and reused for installation in other buildings. The remaining leftover materials from the construction can also be recycled and reused, which greatly reduces the construction waste during the construction process. It is a high-quality, high-performance environmental protection product. The external wall insulation and decoration integrated board is easy to clean, durable and has a long service life

Installation method

Preparation stage: Tools: expansion screw (for concrete and cement brick wall), dovetail nail (for steel structure construction), pistol drill, air nail gun (not necessary), marking pen, tape measure, rubber hammer, cutting machine, etc.

Installation of fitting base: before installing the plate, install the plate fitting base, mainly including the starting part, closing part, edge wrapping, middle seam, internal and external corners, etc.

Installation of plates: after the fitting base is installed, install the first plate horizontally from top to bottom and fix it on the wall with expansion screws or dovetail nails (it is recommended to fix a nail every 60 cm), then insert the female mouth of the second plate downward with the male mouth of the first plate, while tapping the interface of the two plates with a rubber hammer to ensure that the joint of the two plates is tight enough, and then fix the second plate on the wall with expansion screws or dovetail nails, The other plates are then installed in the same way. It should be noted that when the wall size is not consistent with the plate size, the installation should be continued after measuring and cutting.

Install fitting cover plate: after all plates are installed, press the fitting cover plate on the base with force. If it is a fitting of the same material, it shall be fixed on the wall with screws, and then sealed with waterproof glass adhesive.

Remove the protective film: remove the protective film after the plate is installed.

Package

Metal faced insulated sandwich panels is packed by standard carton for export . 8/10pcs per box .

Length :2900/3800/3900mm

Packing width :420mm

Height :140/170mm

Company information

Jinan Dubaier Environmental Protection Materials Co., Ltd. is a manufacturer specializing in the production and research of exterior wall thermal insulation building materials. From establishment to now, we have owned two different factories, domestic sales department and international trade department. The production line adopts German technology and is fully equipped, such as bending machine, spraying machine, light steel bending machine and so on. The factory is strategically located, with convenient transportation and close to the port. It has a complete set of export certificates, CE, ISO, product testing certificates, Alibaba International Station SGS certificates, etc. Our service scope is global, the main markets are South America, North America, Europe. The annual performance showed an upward trend and was also recognized by the government.

FAQ

Q: Are you a manufacturer or a trading company?

A: Jinan DIBAIER ENVIRONMENTAL PROTECTION MATERIAL CO.,LTD was established in 2015, located in Jinan city . We are a manufacturer .

Q: What is required for a detailed quotation?

A: Please let us know the material, size, color, quantity, application, etc.

Q: How about the Technical Support?

A: We will provide installation instruction and video for you, technicians will be sent to help you if it is necessary. However, the visa fee, air tickets, accommodation,wages will be provided by buyers.

Q: How do you guarantee the quality of the products?

A: Each product from our factory has strict testing procedures, and must be 100% quality before delivery. Believing, Respecting, Doing the best.

Q: How can I get the quotation of the project ?

A: We will quote according to your drawings if you have.Our engineer will design drawings for you to confirm if you don't have, and then offer you a quotation.

Hot Tags: metal faced insulated sandwich panels, China metal faced insulated sandwich panels manufactures, suppliers, factory, 50 mm puf panel, pemasangan sandwich panel, puf panel for wall, EPS Metal Sandwich Panel, puf panel wall, 50mm sandwich panel