Metal Sandwich Panel Wall

Metal sandwich panel wall

Metal sandwich panel wall Also known as: metal insulation board.

The composition of the metal sandwich panel wall: the surface is made of aluminum-zinc-plated steel plate, in which the content of aluminum is 55%, and the content of zinc is 43%, which can reach 45 years without oxidation, excellent heat reflectivity, heat resistance Good, 15 years without fading

The interior is composed of foamed polyurethane material. The full name of polyurethane foaming agent is one-component polyurethane foam gap filler, which has a wide range of applications. It has the advantages of pre-foaming, high expansion, small shrinkage, etc., and the foam has good strength and high adhesion. The cured foam has various effects such as filling, bonding, sealing, heat insulation, sound absorption, etc. Easy-to-use building materials. Since the polyurethane is composed of multiple vacuum bubbles, the sound insulation effect is absolutely strong.

The bottom is made of aluminum foil cloth. The surface of the composite aluminum foil is smooth and flat, with high light reflectivity, high vertical and horizontal tensile strength, airtight, watertight, and good sealing performance.

Parameters &Specification

What are the advantages of metal sandwich wall panels?

Environmentally friendly and durable

Metal sandwich panel has stable chemical and physical structure, will not decompose and mildew, non-radiation, pure and green. The board can also be flexibly dismantled and then reused and installed on other buildings, and the leftover scraps from the construction can also be recycled and reused, which greatly reduces construction waste during the construction process. It is a high-quality, high-performance environmentally friendly product. The exterior wall insulation and decoration integrated board is easy to clean, durable and has a long service life.

Accessories

The accessories of metal carved panels mainly include aluminum alloy accessories and aluminum-zinc-plated steel accessories.

Galvanized steel fittings are the same color as the metal engraved panels. This will keep the appearance of the same color, more beautiful.

Aluminum fittings are available in two colors: white and black. The metal engraved plates of the light series have white fittings, and the metal engraved plates of the dark series have black fittings.

Aluminum alloy accessories are not easy to corrode, oxidize and rust, and can better protect the metal carved plate.

How many parts are there in the accessories?

Initial installation accessories

Install accessories at the end

Door and window wrapped fittings

Outside and inside corner installation accessories

Middle seam fittings

Big corner accessories

Installation of sandwich panel wall

1. Foundation laying: When installing metal wall panels normally, the base layer should meet the standard plastering, no cracking, no hollowing, no peeling, smooth surface, vertical facade, vertical yin and yang angles;

2. Setting out the line: The reference line is the initial construction line that is used as the starting point of the construction in the vertical and horizontal directions after the construction starts, and the standard line that keeps the relative position of the graphics on the four walls unchanged. Generally, the vertical reference line of construction should be placed on the top of the building, and the horizontal reference line of construction should be placed at the contour lines of the yin and yang corners and the contours with characteristics;

3. Cutting: According to the design requirements and combined with the actual requirements of the construction site, cut the metal insulation board into the specified size

4. Plug-in: The metal sandwich panel is a light-duty board, which is formed by plugging the slot between the board and the board;

5. Anchoring: In order to completely eliminate the phenomenon of delamination of the thermal insulation decorative board and improve the overall safety of the thermal insulation decorative board, use anchors, fasten the decorative layer, and firmly connect the thermal insulation decorative board to the wall again.

6. Seams: When installing thermal insulation decorative panels on site, use a middle seam fitting between the two panels to splicing the seams between the panels;

Why use metal sandwich panels for house renovation?

1. Fireproof advantage: It has a strong fireproof advantage, because the material is mainly selected from a thermal insulation material that is compatible with the existing fireproof performance, and the fireproof function is the highest among the same materials, so the product has the advantage of fireproof.

2. Advantages of waterproof and anti-cracking: The metal sandwich insulation board mainly uses factory pre-coated inorganic resin board as the decoration surface material, which is fully competent in the face of the quality of cracked products, and there will be no problem of cracking. The external wall metal sandwich panel mainly uses the existing experienced curtain wall weather-resistant adhesive sealant technology, which can ensure that the joints of the system will not crack for more than 20 years and can solve the problem of leakage caused by the external wall. The product can achieve the effect of heat preservation and prevention as well as good-looking decoration, which not only improves the architectural advantages but also achieves a decorative effect.

3. The use of carved panels for external walls and stair partition walls can have the advantage of energy-saving renovation, which has less impact on the renovation of residents, and can improve the thermal performance of buildings.

4. Advantages for construction: The metal sandwich exterior wall panel combines decoration and thermal insulation construction, which saves the process and greatly saves the construction time, shortens the construction period and doubles the construction power.

Why choose us ?

Jinan Dibaier Environmental Protection Materials Co., Ltd. is a manufacturer specializing in the production and research of exterior wall thermal insulation building materials. From establishment to now, we have owned two different factories, domestic sales department and international trade department. The production line adopts German technology and is fully equipped, such as bending machine, spraying machine, light steel bending machine and so on. The factory is strategically located, with convenient transportation and close to the port. It has a complete set of export certificates, CE, ISO, product testing certificates, Alibaba International Station SGS certificates, etc. Our service scope is global, the main markets are South America, North America, Europe. The annual performance showed an upward trend and was also recognized by the government.

Hot Tags: metal sandwich panel wall, China metal sandwich panel wall manufactures, suppliers, factory, sandwich panel foam, puf insulated sheets, puf panel wall, distributor sandwich panel, puf panel roofing sheets, 50mm sandwich panel