EPS Metal Sandwich Panel
EPS metal sandwich panel is made of combustible polystyrene (Eps) particles, prefoaming by heating, and forming by heating in the mold. The eps foam metal sandwich panel is made of micro closed cell structure.
Products Description
50-75mm eps metal sandwich panel outdoors
EPS metal sandwich panel is made of combustible polystyrene (Eps) particles, prefoaming by heating, and forming by heating in the mold. The eps foam metal sandwich panel is made of micro closed cell structure. The eps metal sandwich wall panel has common type and flame retardant type. It has the advantages of light weight, heat preservation, heat insulation, low temperature resistance, certain elasticity, minimal water absorption and easy processing. Eps metal sandwich panel mainly used in building, vehicle, ship, refrigeration equipment and refrigeration industries such as heat insulation, heat preservation, cold.
Product specification
|
Type |
EPS |
|
EPS Thickness |
50mm/70mm/75mm |
|
Metal sheet thickness |
0.27-0.3mm |
|
Effective width |
383mm |
|
Surface |
0.3-1.0mm PE/PVDF coated color steel sheet/stainless steel/aluminum steel/galvanized steel |
|
Water absorption rate |
<0.018 |
|
Fireproof Grade |
B |
|
Temperature range |
-40~200 |
|
Density |
8-230kg/m3 |
|
Color |
RAL |
Performance feature
Low density, high recovery rate and independent bubble structure.
The surface has low water absorption and good permeability resistance.
Acid resistance, alkali resistance, salt, oil and other organic solvents corrosion, aging resistance is excellent.
High temperature does not flow, low temperature does not crack.
Product advantage
Competitive advantage
The company conducted a competitive advantage analysis to identify its strengths and weaknesses compared to its rivals.
The main structure of the building is protected to extend the life of the building. Because the outer insulation layer is placed on the outside of the structure, it reduces the stress caused by the deformation of the structure caused by the temperature change, and reduces the erosion of the structure by harmful substances in the air and ultraviolet light.
01
In the past, internal thermal insulation is used, which is difficult to avoid, while external wall thermal insulation can effectively prevent the generation of thermal Bridges and avoid condensation.
02
The moisture temperature of the wall is improved. Generally, the inner insulation layer needs to be set up, and the permeability performance of the external insulation material is much stronger than the main structure. Generally, condensation will not occur in the inner wall, and the whole wall temperature of the structure layer is improved to further enhance the insulation performance of the wall.
03
It is conducive to the stability of the room temperature. The external wall insulation is adopted, because the structural layer of the wall with greater heat storage capacity is in the inner side of the wall, which is conducive to the stability of the room temperature.
04
Increase the usable area of the house. Can avoid the destruction of the insulation layer of the second decoration.
05
Products Colors
The most popular ones in the export trade are stone grain and wood grain, besides which we also have corrugated vein and brick vein for your choice.
Products Application
Interior wall, exterior wall,roof and floor on steel or concrete structure. For various buildings, additions or renovations.
How to judge the quality of EPS foam board
Judgment method:
First of all, to judge the quality of eps metal siding sandwich panel, we can judge whether it meets the apparent density of 18 ~ 22kg/m3, some manufacturers jerry-building or process does not meet this standard or exceed this standard, it will affect the performance of the product. Weighing one cubic meter of foam board quality is between 18 and 22kgjiu is very good.
Second, cut eps sandwich panel into 5cm thick and 1 meter long sheets, and then bend them by hand. The greater the curvature of the bend, the better the quality.
FAQ
Q1: What are your main products?
A: Our main products have steel structure,warehouse,workshop,prefab house,container house, steel poultry shed,steel car garage,steel aircraft hangar,light steel villa,sandwich panel and other construction materials.
Q2: What will client provide before factory offers good quotation?
A: When we receive inquiry from client, client please fills purchasing intention sheet, providing us with information of house dimensions, draft drawing, layout and materials for prefabricated house. We will design the drawings and offer competitive quotation with the above information.
Q3: What are main materials of prefabricated house?
A: Our prefabricated house materials mainly include light steel structure, sandwich panel, roof tile, door, window, covers, screwsand other accessories.
Q4: What drawing of house will factory supply?
A: Plan drawing, elevation drawing, sectional drawing, foundation drawing, installation drawing.
Q5: How many colors do your eps metal sandwich panel have?
A: Off-white, ivory white, blue, green , red and according to buyer's requirement.
Hot Tags: eps metal sandwich panel, China eps metal sandwich panel manufactures, suppliers, factory, wall panel sandwich, eps aluminum panel, roofing puf sheets, composite foam sandwich panels, puf panel roofing sheets, steel sandwich panel
