Metal Carved Insulated Sandwich Panel Cladding
Metal carved insulated sandwich panel cladding is an integrated board for interior and exterior wall insulation and decoration. It is mainly used in light steel houses, sentry mobile houses, toilets, external wall insulation, interior wall decoration, and renovation of old buildings.
Metal carved insulated sandwich panel cladding
Metal carved insulated sandwich panel cladding is an integrated board for interior and exterior wall insulation and decoration. It is mainly used in light steel houses, sentry mobile houses, toilets, external wall insulation, interior wall decoration, and renovation of old buildings.
The metal carved insulated sandwich panel cladding is divided into outer layer, middle layer and bottom layer. The outer layer is made of galvanized steel plate, polyester paint or fluorocarbon paint baking paint process, and the middle layer is polyurethane foam insulation layer. The bottom layer is a protective layer of aluminum foil.
Advantages of metal insulated sandwich panel cladding
1. Thermal insulation, consumption reduction and energy saving
Insulated sandwich panel has excellent thermal insulation characteristics, and has better cold resistance and thermal insulation performance than traditional exterior wall thermal insulation decorative building materials The energy consumption of heating and cooling is greatly reduced
2. Easy installation and cost saving
The installation method of metal carved board is simple and fast. It is not limited by the seasonal climate and geographical environment. The significantly shortened project cycle not only accelerates the progress of the project, but also saves the construction cost and reduces the comprehensive cost.
3. Lightweight and land-saving, shockproof and crack proof
Metal carved sandwich panel cladding is light in weight, high in strength and good in impact resistance Its light weight not only reduces the burden of the building itself, but also reduces the impact of earthquake on the building to a great extent.
Specification of insulated sandwich panel cladding
Thickness | 16/20mm |
Width | 383mm |
Length | 3800mm(customized) |
Package quantity | 10pieces |
Package Size | 3800mm*420mmx170mm |
Thermal conductivity | 0.018W(10℃)/0.0024W(25℃) |
Classification for burning behavior(PU) | B level |
payment terms | FOB Qingdao |
Color | customized |
Paint Thickness | ≥30um |
Delivery time | 10-15 working days |
Color selection
There are many design and color for choice ,please check the following hot sale grain .
Installation
Installation of fitting base: before installing the plate, install the plate fitting base, mainly including the starting part, closing part, edge wrapping, middle seam, internal and external corners, etc.
Installation of plates: after the fitting base is installed, install the first plate horizontally from top to bottom and fix it on the wall with expansion screws or dovetail nails (it is recommended to fix a nail every 60 cm), then insert the female mouth of the second plate downward with the male mouth of the first plate, while tapping the interface of the two plates with a rubber hammer to ensure that the joint of the two plates is tight enough, and then fix the second plate on the wall with expansion screws or dovetail nails, The other plates are then installed in the same way. It should be noted that when the wall size is not consistent with the plate size, the installation should be continued after measuring and cutting.
Install fitting cover plate: after all plates are installed, press the fitting cover plate on the base with force. If it is a fitting of the same material, it shall be fixed on the wall with screws, and then sealed with waterproof glass adhesive.
Remove the protective film: remove the protective film after the plate is installed.
What can metal sandwich panel cladding be used for?
The metal carved insulated sandwich panel cladding have a wide range of adaptability. They are not only suitable for the external wall insulation decoration of newly-built frame structures, brick concrete structures, steel structures, light-weight houses and other buildings, but also for the energy-saving transformation of existing buildings and indoor and outdoor decoration.Metal carved insulated sandwich panels can also be used in mobile food trucks and motor homes. First of all, it is an environmentally friendly material that does not produce harmful substances, so you can live and cook with confidence; secondly, its fire-retardant and flame-retardant function greatly enhances safety and prevents fires from occurring; it has strong thermal insulation and sound insulation effects, and also takes into account The appearance is decorative, and it also meets the requirements of dining cars and RVs.
Package and Shipping
The metal carved insulated sandwich panel cladding is packaged by standard carton for export . Quantity :8/10 pc / box
Shipping by sea ,20GP /40GP/40HC container
Hot Tags: metal carved insulated sandwich panel cladding, China metal carved insulated sandwich panel cladding manufactures, suppliers, factory, insulated precast panels, EPS Metal Sandwich Panel, insulated sandwich roof panels, puf sandwich panel, puf insulated sheets, 50 mm puf panel
