Decorative Metal Panels
Metal carved panels have excellent thermal insulation performance and rich and vivid decoration results. They are usually installed on external walls, so how to install metal carved panels? After ordering the metal carved board and its accessories, it is necessary to prepare tools for installing the board and accessories
Products Description
01 Environmental sound insulation
Good sound insulation effect. suitable for apartments. hospitals.schools and other buildings near noise.
02 Easy installation
The decision adopts the traditional buckle plate installation way. do not need professional personnel. ordinary carpentry master will install. save labor. time and space.
03 Waterproofand damp-proof
After special treatment, has good flame retardant performance, safe and wordless, avoid rain, snow, freezing, dry, wet cycle caused by structural damage
04 Thermal insulation
Compared with the traditional exterior wall insulation decorative building materials. Decorative metal panels has excellent cold resistance and heat insulation performance.
05 Green environmental protection
The advantage of light weight reduces the burden of the building itself and reduces the impact of the earthquake on the building.
Products advantages
Green environmental protection,
durable
1.Low cost, beautiful and generous. The project cost is low, the colors and patterns are rich, and the decorative effect is good.
2.Fast construction and durability. Light weight, convenient transportation and installation, and short construction period.
3.Fire-proof, waterproof and moisture-proof Hard polyurethane sandwich, up to B1 fire rating, thermal insulation, strong pressure resistance.
4.Noise reduction, environmental protection Independent closed bubble structure, sound insulation and noise reduction, reduces heating and cooling energy consumption, and saves energy expenditure.
5.Support customization, sufficient inventory Professional production, complete categories, support customization, large quantity discount.
Products application
Products installation
Decorative metal panels manufacturer: How to install metal carved decorative metal panels?
Metal carved exterior decorative metal panels have excellent thermal insulation performance and rich and vivid decoration results. They are usually installed on external walls, so how to install metal carved panels?
Step 1: Preparation phase
After the ordered metal carving board and its accessories are complete, it is necessary to prepare tools for installing the board and accessories. Important tools include shrinkage screws, dovetail nails, pistol drills, air nail guns, marking pens, tape measures, rubber hammers, and cutting machines.
Step 2: Install the accessory base
Before installing metal carved boards, the base of the board accessories should be installed first, mainly including starting parts, closing parts, edge wrapping, middle seams, and internal and external corners.
Step 3: Install the board
After installing the base of the accessories, install the first metal carved board horizontally from top to bottom, with the female mouth facing down and the male mouth facing up. After installing the first board, use expansion screws or dovetail nails to secure it to the wall (fixing one nail every 60 cm), then aim the female port of the second board towards the male port of the first board and insert it tightly downwards. At the same time, use a rubber hammer to buckle the interface between the two boards to ensure that the connection between the two boards is sufficient and tight, Then the second board can be fixed to the wall using expansion screws or dovetail nails, and the remaining boards can be installed in the same way.
Step 4: Install the accessory cover plate
After all the metal carving boards are installed, press the accessory cover plate firmly under the base. If it is a component of the same material, it can be fixed to the wall with screws and finally sealed with waterproof glass adhesive.
Step 5: Tear off the protective film of the metal carved board profile
In order to protect the surface layer of metal carved boards from scratches during transportation, all factory produced boards are covered with protective film cages on their surfaces. This way, after the boards are installed, we can remove the protective film, which can make the building look new.
FAQ
Q:what is your delivery time?
The time of delivery is within 15days after we receive the deposit.
Q:What is the shipping port? We ship the goods via Qingdao port.
Q:What is your payment terms?
We accept 30% T/T in advance,70% in the period of shipment. Or L/C at sight.
Q: Are you manufacturer?
A: Our factory is located in the biggest plywood production base of China-Linyi Yitang Industry Park.
With more than 20 years manufacturing and more than 10 years experiences, offer the best price and quality plywood
Q: What are your main products?
A: Decorative Metal Panels.
Q: Where are your main market?
A: We are people-oriented company and our main markets are Southeast Asia, Middle East, South Africa, Russia, South
America etc. We deliver about 1000-1500 containers per year
Hot Tags: decorative metal panels, China decorative metal panels manufactures, suppliers, factory, pressed tin shower walls, interior metal wall panels, wood veneer panels, decorative metal cladding, shaker style wainscoting, easy panelling
