Metal Siding Panels For House
Metal siding panels for house are composed of three parts: surface material, core material and inner material. Its advantages are: it can keep beautiful for a long time, it has good sound insulation performance and flame retardant performance, strong thermal insulation performance, health, safety and pollution-free, and can be installed quickly. The outer metal is galvanized steel plate, using high weather-resistant polyester paint, which will not fade for 15 years, the middle is polyurethane foam insulation layer, and the bottom layer is made of moisture-proof aluminum foil
Products Description
There are more than 100 combinations of embossed patterns and colors. The luxurious and beautiful decoration effect makes the building highlight the grade and taste. Simple and flexible disassembly and assembly methods make it easy to replace the wall design. The metal siding panels for house is not only suitable for the thermal insulation decoration of the exterior walls of new brick-concrete structures, frame structures, steel structures, light-weight houses, etc., but also for the decoration and energy-saving renovation of existing buildings, as well as for indoor and outdoor decoration. The advantages of metal siding panels for house are: Cost-effective, fire-resistant and flame-retardant, with its wide application, metal carved panels will have a lot of room for development in the future.
1. Metal siding panels for house belong to the category of thermal insulation panels, so they also have the advantages of thermal insulation, heat insulation, and sound insulation.
2. The gorgeous and beautiful surface of the metal insulation board is a colored embossed decorative metal plate pressed together after special layer treatment, so it has a better decorative effect on the outer wall structure.
3. This kind of construction material plate integrated with thermal insulation and decoration, the installation and application are not restricted by seasons, and it is very convenient in application and use. In addition, it is also very simple in disassembly and assembly. Users can according to
The wall structure is easy to replace and match the panels.
4. There are many types and styles of metal carved panels. There are hundreds of embossed patterns and matching colors of this kind of insulation panels, so it also has the characteristics of many options
Metal carving boards can be used not only in old building structures, but also in newly built brick-concrete structures, frame structures, steel structure structures, various mobile house structures, light body house structures, and the interior and exterior walls of building structures. This insulation board can be used
Product characteristics
Analysis of the characteristics of metal siding panels for house of new building materials
New building materials", referred to as new building materials, are new types of building materials that are different from traditional bricks, limestone and other building materials.
The industry has clearly defined the scope of new building materials, that is, new building materials mainly include four categories: new wall materials, new waterproof sealing materials, new thermal insulation materials and decoration materials.
Dubaier metal carved insulation board absorbs many advantages of modern wall materials at home and abroad, and is a combination of heat preservation, decoration, heat insulation, environmental protection
It is a new type of light-weight, energy-saving and environmentally friendly building material that is popular and best-selling in the world.
Dubaier has brick pattern, spray pattern, wood grain, orange peel pattern, stripes, cultural stone pattern and other texture finishes and hundreds of colors available
Choose and guarantee that the coating will not fade for ten years. The specifications of the board are: 3000-6000*383*16mm, and the standard specifications are:
3800*383*16mm, because it is very easy to insert the concave and convex buckle grooves between the boards, so it is favored by the majority of users!
Product installation
The steps to install metal siding panels are as follows:
1. The construction materials are delivered to the site: the delivery includes sandwich panels, the subframe components (cold-formed shapes), and accessories (including flashing, fasteners, gaskets, seals, etc.). Metal can provide all the components required to complete the installation process.
2. The materials delivered by the carrier are unloaded with construction handling equipment.
3. The subframes are assembled, and installed with beams, posts and purlins.
4. The protective film is removed from the sandwich panels.
5. The sandwich panels are fastened to the subframe structural members using suitable fasteners.
6. The joints between the sandwich panels are sealed and the flashing is installed.
FAQ
Q: Are you trading company or manufacturer ?
A: Integration of factories and trading companies
Q: How long is your delivery time?
A: It needs about one week
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but
do not pay the cost of freight. And we need to charge the mould fee if it needs to open new mould.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before the shipping.
Hot Tags: metal siding panels for house, China metal siding panels for house manufactures, suppliers, factory, ready made wall panels, steel wainscoting panels, galvanized wall covering, bathroom wall paneling 4x8, stainless steel sheet wall protection, hot rolled steel wall panels
