Jinan Dibaier Environmental Protection Materials Co., Ltd
Prefab Metal Wall Panels
Prefab Metal Wall Panels manufacturers
Prefab Metal Wall Panels suppliers
Prefab Metal Wall Panels factory
Prefab Metal Wall Panels best
Prefab Metal Wall Panels high quality

Prefab Metal Wall Panels

The following are the core performance advantages of prefab metal wall panels, which you can check against in factory and residential building scenarios. Prefabricated panels are resistant to aging, impact, and fire erosion. Because they use corrosion-resistant metal substrates and electrostatic sprayed surfaces, they can withstand harsh environmental conditions. They have high structural strength and can withstand high wind pressure.

Send Inquiry
Description

 

Performance Advantages
 

The following are the core performance advantages of prefab metal wall panels, which you can check against in factory and residential building scenarios.

High Durability

It is resistant to aging, impact, and fire erosion. Because they use corrosion-resistant metal substrates and electrostatic sprayed surfaces, they can withstand harsh environmental conditions. They have high structural strength and can withstand high wind pressure.

Quick Installation and Cost Savings

Factory-prefabricated with highly accurate dimensions, they can be easily assembled on-site, reducing construction time, on-site procedures, and labor costs. During installation, the panels are arranged according to standard joist spacing, supported by a light steel frame, and finally secured with self-tapping screws or clips.

Thermal and Sound Insulation

The sandwich insulation layer effectively isolates thermal bridges, achieving energy and cost savings, while improving acoustic performance, reducing external noise interference, and creating a comfortable indoor environment.

Earthquake and Wind Resistance

The overall panel strength and connection fixing methods are optimized through our engineering design to meet wind pressure and earthquake resistance requirements, suitable for high-rise and large industrial buildings.

Environmentally Friendly and Sustainable

80% of the outer metal wall panels use recyclable metal substrates, avoiding resource waste. Energy-saving design and environmentally friendly materials comply with green building standards.

Flexible Customization

Our color swatches offer a variety of colors, textures, and geometric splicing options, and support horizontal or vertical installation. Personalized design needs such as perforation and irregular shapes are supported. The wall panels can also adapt to various decorative requirements, meeting customization requirements from appearance to function.

 

prefab metal wall panels: Main Specifications and Materials

 

Specification Name

Material Name

Optional Panel Materials

Aluminum alloy plate, color-coated galvanized steel plate

Thickness

Typically 0.8–1.2mm;

Standard Width: 600mm, 900mm; Non-standard widths can be customized.

Standard Length: Approximately 1.2–7.36m.

Insulation Core Material

Polyurethane (PU) sandwich, flame-retardant, thermal conductivity ≤0.023W/m·K.

Surface Treatment

PVDF fluorocarbon coating, polyester powder coating, or anodizing, etc. Generally, a service life of 20–25 years is possible

Structural Specifications

Various locking and fastener types are available.

Connection methods include concealed joints, tongue-and-grooveless joints, etc.

All metal panels and connectors meet relevant building metal material standards.

 

 

 

Corrosion Prevention Misconceptions and Corrections

 

1. Misconception

 

Do you usually think that only the front corrodes and the back doesn't? In fact, the corrosion rate of the back panel of prefab metal wall panels is usually 3-5 times that of the front. Because the back of the panel is in a closed cavity, once moisture enters and cannot evaporate, it easily forms a concentration cell corrosion in an oxygen-deficient environment, leading to corrosion from the inside out.

 

2. Corrosion Type Classification and Treatment

 

Corrosion Type

Location

Technical Countermeasures

Galvanic Corrosion

Dissimilar metal contact points

Insulating gaskets must be installed

Crevice Corrosion

Rivets and screw fasteners

Apply corrosion inhibitor before applying sealant

Filiform Corrosion

Defective aluminum plate surface under coating

Thoroughly polish the defective aluminum plate surface under coating to Sa2.5 level

 

3. Corrosion Prevention Construction Technical Specifications

1. Surface Treatment: The repaired area must meet ISO 8501-1 Sa2.5 standard

2. Coating System Configuration: Epoxy zinc-rich primer must be used, utilizing the cathodic protection of zinc to sacrifice the anode to protect the iron substrate. The dry film thickness (DFT) should be no less than 60μm. An epoxy micaceous iron oxide intermediate coat is used, utilizing its sheet-like structure to shield against moisture penetration. The DFT should be no less than 100μm. Then, the appropriate topcoat is selected based on the environment. For ordinary environments, polyurethane (PU) is used; for highly corrosive environments, PVDF must be used with a DFT no less than 40μm.

3. Back cavity protection: Ensure airflow on the back of the mounting plate, following the "rain curtain principle," to promptly drain condensate.

4. Acceptance criteria: Dual testing using a wet film thickness gauge and a magnetic thickness gauge is employed to ensure the total dry film thickness meets design requirements and there are no missed areas.

2

 

Static Electricity Prevention Guidelines

 

Did you know that prefab metal wall panels may generate static electricity during actual use? This temporary, macroscopic charge can quietly attract dust from the air, leading to dust accumulation on the wall panel surface after prolonged use. Don't worry, this isn't a problem with the panels themselves, but rather an unavoidable occurrence during manufacturing. Below, Dibaier will use a table to show you how to prevent this.

 

Category

Key Points

Core Impact of Dust Accumulation

Static electricity attracts various dust impurities, affecting wall cleanliness, weakening paint gloss, and accelerating oxidation.

Cleaning and Maintenance Misconceptions

Using ordinary dry wiping methods isn't impossible, especially in the short term, but it's not recommended for long-term use. This will further exacerbate static electricity and worsen dust accumulation.

Correct Solution

Long-term prevention should primarily involve wiping with neutral cleaning agents. For high-cleanliness environments, anti-static coated wall panels can be used to reduce dust adsorption efficiency at the source.‌

 

 

 

Interior Decoration Effects

 

IMG4308

Realistic Wood Grain Texture

Utilizing high-definition transfer or 3D embossing technology, it reproduces the natural wood grain of oak, walnut, and teak, offering a smooth and delicate feel that visually rivals solid wood finishes.

IMG4311

Diverse Colors

Available in matte, glossy, or antique architectural styles, suitable for mainstream design styles such as Scandinavian minimalism, industrial style, and Neo-Chinese style.

IMG4307

Seamless Splicing Design

Achieves continuous wood grain throughout walls or ceilings, avoiding the dust accumulation problem associated with traditional wood panels due to seams.

 

4
Overseas Packaging

Corrosion-resistant Packaging: Double-sealed with VCI vapor phase rust-preventing paper and PE film to isolate from salt spray and moisture corrosion;
Stable Load-bearing Capacity: Fumigation-free pine pallets and crates, compatible with container sizes, and highly impact-resistant;
Environmentally Friendly Reinforcement: Filled with biodegradable cushioning materials, meeting international shipping standards;
Zero-Damage Delivery: A full-process packaging verification system ensures safe arrival in global markets, enhancing brand value.

 

 

Hot Tags: prefab metal wall panels, China prefab metal wall panels manufactures, suppliers, factory

Inquiry
goTop

(0/10)

clearall