Residential Metal Siding Panels
Metal residential metal siding panels have been widely used in recent years. The material is mainly made of environmentally friendly raw materials (the inner polyurethane layer is the same material as the inner insulation layer of refrigerators and air conditioners). It is non-toxic, pollution-free and odor-free, giving the building green protection and decoration. . The surface of the metal carving board is 03 thickness galvanized steel plate (containing 55% aluminum), the middle is rigid polyurethane foam, the back is aluminum foil cloth (with moisture-proof effect), the total thickness of the board is 1.6 cm, 2 cm, 5 cm Multiple thicknesses; 3 types of width, 38 cm wide, 38.3 cm wide, and 39.3 cm wide. The length can be customized according to customer requirements. The metal carved board has the function of decoration and heat preservation. In terms of appearance, through embossing and baking galvanized sheet, more than 100 kinds of artistic decoration effects such as mahogany, brick, bark, cultural stone, marble, mosaic, etc. can be formed; the metal carved board effectively solves the problem of single function of traditional materials The problem is that the exterior wall decoration and heat insulation are carried out simultaneously; the house decorated with metal carved panels, because of its good heat insulation effect, in summer, the indoor temperature is 3-5 degrees lower than that of ordinary buildings, and it only takes about 5-8 years Over time, the cost of building air-conditioning and refrigeration savings can recover the cost of materials.
Products Description
Metal residential metal siding panels are often used on the casing of the transformer box. Why is this? Many disasters are irresistible when they occur. We must do sufficient preventive work before disasters occur. Especially in terms of power and communication, reliable facilities will save many lives and property, and create better operating conditions. In our country, after continuous innovation in the construction of the power grid, the reliability and safety are getting higher and higher. The use of metal carved panels can be recognized in this respect.
Metal residential metal siding panels has a name abroad, it is "100-year-old wallboard". It sounds like it is very durable. It is composed of three layers, the metal embossed board on the outer surface, and the thermal insulation material in the middle. , and the bottom layer conforms to it. Therefore, the use of this kind of metal carving board for the outer shell of the transformer box has a high safety performance and can reduce the threat burden of the operating personnel.
Products performance
1. Good protection level The protection level of metal carved panels is very high, which can prevent solids with a diameter larger than one millimeter from penetrating into the box. Outdoor rainwater will not enter the box from any angle. In this way, the sealing performance is good, which can ensure that outdoor impurities do not interfere with the side substation, and can prevent rain and dust during operation, strictly ensuring the stable operation of the equipment. Especially in coastal cities with heavy humidity, metal carved panels can maintain a good level of protection to ensure that they will not be disturbed by rain erosion and damp for a long time outdoors.
2. Moisture-proof, flame-retardant and sound-proof metal carved board has metal anti-corrosion panel with good chemical and physical properties. The middle interlayer is polyurethane foam interlayer with a closed cell rate as high as 93%, and the bottom layer is aluminum foil cloth. All three have the function of waterproof and moisture-proof , There are compact concave-convex slots installed between the plates, so that the structural damage caused by seasons such as rain and snow freeze-thaw, dry-wet cycles and changes in dryness and humidity are completely avoided, and moisture seepage, damp mold and other phenomena are eliminated. After the exterior wall of the metal carved board is specially treated, the insulation board has excellent fireproof and flame retardant properties, and the safety is guaranteed. The core material in the middle is a thermal insulation layer made of high-density polyurethane foam, and the interior is an independent closed air bubble structure, which will have a good sound insulation effect.
3. Anti-seismic and anti-pressure metal carving plating is a modern building material with excellent performance of high compression resistance. It can be widely used in building exterior wall insulation, and can also be used as a decorative plate indoors. It is a relatively good building material in the current building materials. Inexpensive, quality and functional building materials. At the same time, when it is used in areas with frequent earthquakes, it can also ensure that the building will not be too affected by aftershocks.
Products application
1. Metal fireproof metal siding panel are used in various mobile houses, temporary houses, simple houses and other light-weight mobile houses and light steel mobile houses;
2. It is widely used in building exterior wall insulation. Cracks will occur after the front exterior wall insulation construction is due to the insufficient design of the external thermal insulation structure of the thin plastered polystyrene board.
Design of cast-in-place non-mesh polystyrene board external thermal insulation structure. Rubber powder polystyrene board particles pre-mixed dry-mixed thermal insulation material external wall external thermal insulation structure design.
For exterior wall decoration, metal carved panels are carved by special molds and have unique tile shapes, and various colors have considerable decorative effects. It is a new type of energy-saving decorative material for exterior wall decoration. It is also a new type of green building material with good quality, low price and good quality in the current building materials.
3. For exterior wall renovation, it is directly fixed to the original wall surface without primary treatment. The cost is cheaper than any product on the existing market. In the reconstruction of traditional exterior walls, the original materials on the surface must be removed first, which will inevitably damage the insulation layer (such as; benzene board). Therefore, the cost of renovation will be increased.
4. The construction is convenient, fast, trouble-saving and labor-saving, which not only reduces the on-site operation procedures and time of workers, but also reduces the overall cost.
Product advantages
Advantages of PU foam decorative exterior metal siding panel in cold regions
1. Excellent thermal insulation performance
The main body of PU foam decorative metal wall panel is a composite material based on thermal insulation materials. Its thermal insulation performance is very good, which can effectively reduce the indoor temperature in winter in cold regions and prevent the intrusion of outdoor high-temperature heat in summer, so as to achieve the purpose of energy saving and consumption reduction.
2. Excellent moisture-proof and frost-proof properties
Due to the high air humidity and high groundwater level in cold regions, it is very important for building materials to have high moisture and frost resistance. Compared with traditional exterior wall materials, PU foam decorative metal wall panel has better moisture-proof and anti-freeze performance, which can effectively prevent rainwater penetration and condensation, and prevent the wall from being affected by moisture to cause cracks and mold. At the same time, the anti-freeze performance of the decorative and PU foam decorative metal wall panel is also very good, which can adapt to the environmental requirements of low temperatures in winter in cold regions.
3. Beautiful appearance
PU foam decorative metal wall panel has a beautiful appearance. On the one hand, it can satisfy people's pursuit of architectural beauty, and on the other hand, it can play a symbolic role, thereby enhancing the grade of the architectural image.
4. Low heat transfer coefficient and remarkable energy-saving effect
PU foam decorative metal wall panel has a low heat transfer coefficient, and their thermal conductivity is 1/4 of that of ordinary concrete, which can significantly reduce the loss of heat dissipation, thereby achieving a better energy-saving effect.
5. Stable material quality
The production process of PU foam decorative exterior metal siding panel adopts the factory production method, and the quality of each batch of materials can be strictly controlled to ensure the stability of the material quality.
Application of PU foam decorative metal wall panels in cold regions
Hot Tags: residential metal siding panels, China residential metal siding panels manufactures, suppliers, factory, flat lock wall panels, pvc interior wall panels, revit metal wall panels, shower tile sheets, mobile home interior wall panels, pressed tin shower walls
