Polyurethane Decorative Wall Panel

 

Polyurethane decorative wall panel is a kind of building decoration material that has become popular in recent years. It not only has good heat preservation, but also has a good decorative effect because of its many patterns and colors. Therefore, there are more and more products on the market. How can customers choose high-quality products?
The first is to look at the thickness. Due to the close relationship between thickness and application building height, authentic polyurethane decorative wall panel are very thin. The adhesion of each layer of the board is too thick, and it is easy to appear bulging and cracking.

After reading the thickness, you have to break open the sample to see the inside. If the polyurethane insulation layer in the middle is clearly separated from the steel plate after breaking apart the sample, it means that the steel plate and polyurethane are not tightly bonded, and air can easily enter and cause corrosion. High-quality products, after breaking apart, the polyurethane will still be tightly bonded to the steel plate layer.
The polyurethane layer can then be pressed by hand. The polyurethane of high-quality metal carving board is foamed at high temperature. The foam is dense and the hardness is very high.
The last thing to look at is the price. We must know that there is no real good quality and low price in this world. Everything has a cost. The lower the cost, the lower the price will naturally be. Take metal carved panels as an example, there are different types of paint layers on the surface, and the same type has different brands, which all determine the color durability of the surface layer. The steel plate material is the main reason for the price difference. Ordinary galvanized steel sheets are easy to rust, while galvanized steel sheets can last for 45 years without being corroded, and the price of aluminum sheets is even higher. Taking the polyurethane of the insulation layer as an example, there is a big difference between ordinary foaming and high-temperature foaming. Apart from the equipment cost, the density and hardness of high-temperature foaming polyurethane are several times that of ordinary foaming. , the amount of polyurethane used will of course be much higher than that of ordinary foamed polyurethane. The price naturally widened the gap.
Therefore, when choosing a metal carved board, the quality of the product must be the main focus. After comparing multiple products, and then considering the price factors to choose a more reasonable product, only in this way can the cost performance be improved.

 

 

Polyurethane decorative wall panel not only have good decorative performance, but also have the effect of heat preservation and heat insulation, and have a long service life, so they are now being used more and more widely, not only on the exterior walls of buildings, but also in some It has also begun to be used as a building material in public areas, such as sentry boxes in parks.

 

1. The polyurethane decorative wall panel itself is light in weight, which reduces the load on the wall structure. Combined with the air layer in the operating system in a variety of ways, it achieves multiple low energy consumption and environmental protection, and can reasonably and effectively meet the low energy consumption standards of different places. .

2. The skin is the surface layer of metal material, which has a long service life without peeling off, bulging and cracking.

3. The production process is all carried out by mechanical automation technology production line equipment. It has a stable chemical structure and physical structure, and the yield rate exceeds 99.9%.

4. The hot-dip galvanized steel plate selected for the base plate of the metal carving board sentry box has a service life of more than 45 years, and the skin has been treated with a variety of special technologies, with wear resistance, corrosion resistance, acid and alkali resistance, salt spray test, etc. The excellent performance of the layer can keep the building facade clean and tidy for a long time. At the same time, it has a lower operating cost than other decorative insulation systems, and has a very high cost-effective advantage.
In short, the use of metal carved boards to build the sentry box can not only make it have a good appearance, but also have good thermal insulation, which can greatly reduce the construction cost in the long run.

 

 

Polyurethane decorative exterior wall panels is a new type of thermal insulation composite material that has become popular in recent years. It has various patterns, has good decoration, and is convenient for construction and quick to install. However, many users have not mastered the correct installation method because of the first use, which leads to the installation effect not reaching expectations, and may also cause material waste and damage.

So what are the steps to install the metal carved panels?

The installation tools should be prepared before installation: electric drill, expansion screws, self-tapping screws and main materials.
1. First place the metal carving board on the wall, turn on the electric drill, and then use the electric drill to drill holes in the wall through the connection of the metal carving board.
2. Then install expansion screws at the punched holes, and fix them with self-tapping screws.
3. Finally, place another board on top of the fixed metal carving board, and insert the groove of the other board into the fixed board slot. Then repeat the above operation.
After the installation is completed, the exterior wall will be beautifully decorated, heat-insulated, fire-proof, moisture-proof and sound-proof.
The installation method of metal carved panels is simple and fast, and it is not restricted by seasonal climate and geographical environment, and can be installed and used throughout the year. The project cycle can be greatly shortened, and the construction cost can be saved at the same time, and it can bring better aesthetics.

 

 

1. Q:Are you a manufacturer or a trading company?
A: We are a Polyurethane Decorative Wall Panel manufacturer with 15 years of professional experience in this field.

2. Q: What is your minimum order quantity?
A:100 square meters.

3. Q: delivery date?
A: According to your quantity. Taking 40HQ as an example, the goods will be delivered within 15 days after the advance payment.

4. Q: Are samples are available, are they free?
A:Yes, the samples are free, but you need to pay for shipping. If you order products from us, the shipping cost will of course be
refunded to you.

5. Q: What if we still need accessories?
A: U-shaped groove base, inner and outer corners, aluminum profiles and other accessories can be provided.

6. Q: What are your payment terms?
A:T/T proforma invoice has 30% deposit, and the balance before shipment is 70%.

7. Q:What are the main pattern options?
A: Brick pattern,elastic paint pattern,granite pattern,stone pattern,mosaic pattern,tile pattern,long stone pattern,marble
pattern,flat pattern,wood pattern and etc.

Hot Tags: polyurethane decorative wall panel, China polyurethane decorative wall panel manufactures, suppliers, factory, Fireproof Metal Siding Panel, corrugated tin half wall, mdf wall panels interior, height of wainscoting, metal stud panels, laminate bathroom walls