Outdoor Wall Panels

 

Integrated house outdoor wall panels structure:
Surface layer - embossed galvanized steel plate
Sandwich layer - polyurethane
Different materials - aluminum foil
Product Categories:
According to different materials, it can be divided into: single-sided metal carving board (other than aluminum foil paper)
Double-sided metal carved panels (other than galvanized steel panels)
According to the material of the sandwich layer, it can be divided into: polyurethane metal carving board, rock wool metal carving board
Extruded board metal carving board, flame retardant polystyrene board metal carving board
Product performance:
Insulation and heat protection, energy saving, convenient equipment, cost saving, light weight and land saving, shock resistance and crack resistance, board flame retardant, waterproof and moisture proof, sound insulation and noise reduction, quiet and comfortable, green and environmentally friendly, durable and highly decorative, with a large selection
The scope of products:
Municipal sanitation construction, decoration of various building exterior walls (brick-concrete structure, steel frame structure, etc.), innovation and renovation of old buildings, sentry box activity room, mobile public toilet, workshop factory building, logistics storage, etc.
Integrated wall panels belong to the wall decoration materials, which can basically be used. Generally, it is not recommended to use them in some places. Although they can also be used on exterior walls and toilets, it is only that the exterior walls will change color after being exposed to the sun for a long time, and the toilets are prone to water. It depends on the operation of the equipment engineer

 

 

How to install decorative insulation outdoor wall panels waterproof?

 

This is an article about installing decorative insulation sandwich panels.

Modern architectural decoration pursues various forms. In order to satisfy people's pursuit of beauty, decorative wall panels have gradually become the mainstream of exterior wall decoration. This demand has also been reflected on many social media platforms. The playback volume of a single video is more than 3 million, and it is still growing, which reflects people's constant pursuit of beauty and comfort.

 

Modern architectural decoration also pursues a variety of shapes. In order to satisfy people's pursuit of beauty, decorative wall panels have become the mainstream of exterior wall decoration. The insulation panel material is different, and the decorative wall decoration is different. In addition to decoration, people in different regions pay different attention to exterior insulation panels. People in high-temperature areas care about UV protection and heat insulation; people in low-temperature areas pay more attention to the thermal insulation ability of external insulation panels; residents in rainy areas pay more attention to potholes and external tidal energy; residents around forests care about whether they are insect-proof and anti-fungal, and algae growth. The decorative insulation sandwich panel we produce not only highlights the decorative function, but also solves the above-mentioned plight of the residents, and is very popular among the public. This article will take you through how to use this insulation panel DIY beauty room wall. If you haven't done it before, don't be fooled: with a little know-how, you can slap a speed board with ease and get great results.

 

Installing decorative siding is an easy task with BFT wall panels, It's as simple as putting together blocks.Billy Baldwin: "The first rule about decorating is that you can break almost every other rule."

Before you begin, the essentials you will need include:

1. decorative insulation sandwich panel

2. Accessories

1. Tape measure

2. Handsaw/chainsaw

3. Laser Level

5. Pistol Drill

6. Electric hammer

7. Styrofoam Decorators caulk

8. Plastic expansion tube

9. Wood screws

10. Pen and paper

11. Calculator

Step 1: calculate the number of decorative siding needed

First measure the area of ​​the wall to be decorated and calculate the number of panels. The effective width of the wallboard is 38.3cm, and the number of wall boards required can be known by calculating the wall area. At the same time, because of the fixed size of the board, some material waste rate needs to be added to ensure sufficient material.

Step 2: Calculate the type and length of the accessories used for the wall panel

Before installing insulation panels, you need to decide how the panels will connect. You can use the starting piece, the middle joint piece, and the closing piece of this kind of wallboard for connection. These accessories will not affect the decorative effect of the wallboard, and at the same time can ensure that the wallboard is very stable during installation. Plan the plug-in method and location of accessories. And mark it with a pen.

Step 3: Prepare the Wall Panels

Before installation, the insulation panels need to be prepared. Cut the insulation panels to size with a hand saw and leave to dry to ensure that the bonding area is dry and smooth.

 

tips: Do not tear off the coating first when cutting, to prevent iron filings from damaging the paint surface during cutting.

Step 4 Prepare accessories

Cut the accessories according to the length of the wall with a hand saw.

 

Step 5 Install the starter

Use a laser level to project a level position on the wall, use a pistol drill, dovetail on steel or wooden structures, and use an electric hammer on cement walls to fix the starter from the bottom of the wall.

tips: In rainy areas, holes can be drilled downwards on the starting parts to facilitate the outflow of accumulated water.

Step 6: Fasten the insulation panel to the Wall

Insert the bottom of the wall plate into the groove of the starter. Fix the wall panel firmly to the wall by drilling holes. If the installed wall panel needs to use the middle piece, use the laser level to project the vertical line, you need to install the middle piece behind the board according to the vertical line first, and then fix the board on the wall.

Step 7: insulation panel Connections

When installing the next wall plate, align the edges with the already installed wall plate. Insert the seam piece at the wall panel interface while pressing down firmly on the groove where the bottom of the panel inserts into the first wall panel. Use a pistol drill to secure the wall panel's centerpiece to the wall.

 

Step 8: Fill the Gaps Between the Wall Panels

After the wall panels are installed, it is necessary to check for gaps between the panels. If there is a gap, it needs to be repaired with a wallboard styrofoam to ensure that there is no gap between the wall and the wallboard. Tools and materials can be purchased at local building materials markets.

 

 

Q: What material is outdoor wall panels?

A: The core layer is mainly rigid polyurethane foam. See "What Are BFT Wall Panels"

 

Q： what about air circulation between the concrete and the finish?

A: OSB board and breathing paper can be used.

 

Q： How to order?

A: From here-contact us

 

Q： location？

A： It’s from China.

 

Q: Where can I find this in Malaysia?

A: We are looking for global distributors and will see you in your market in the near future.

 

Q: Do you have distributors in Philippines?

A: We are looking for global distributors and will see you in your market in the near future.

 

Q: does it protect from heat and cold?

A: Yes.

 

Q: are they fireproof?

A: Self-extinguishing from fire

Hot Tags: outdoor wall panels, China outdoor wall panels manufactures, suppliers, factory, exterior wall panels 4x8, shower enclosure panels, pvc lcd panel, mdf wainscoting, deco wall panels, bathroom side panels