Pu Wall Cladding Panels Polyurethane Foam Thermal
High density polyurethane foaming technology is adopted for metal carving board sandwich. Polyurethane foaming is currently known to have the lowest thermal conductivity among building thermal insulation materials, about 0.025w/m · K, which is far lower than the thermal conductivity of national efficient thermal insulation materials (according to the national standard, materials with thermal conductivity not greater than 0.12W/(m · K) when the average temperature is not higher than 350 ℃ are called thermal insulation materials, such as asbestos, Perlite, etc; A material with a thermal conductivity below 0.05W/(m · K) is called an efficient insulation material, indicating the strong performance of polyurethane insulation materials.
Products Description
By using pu wall cladding panels polyurethane foam thermal as insulation layers, the house will become "warm in winter and cool in summer". In summer, the outdoor hot air cannot be transmitted into the room, and the indoor temperature will naturally be low. You can turn on air conditioning less or no air conditioning, and the cold outside in winter will not invade the room. The indoor heat will also be blocked indoors, reducing heating costs and increasing living comfort.
The high-density polyurethane interlayer has excellent thermal insulation properties and excellent cold resistance compared to traditional exterior wall insulation and decoration materials
The combination of over a hundred types of relief patterns and colors provides greater space for architectural design. The simple and flexible disassembly and assembly method makes the replacement of wall design matching easy. Colors can also be customized according to the requirements of special customers.
Product Structure
| Mattress Size | Mattress Size/mm | Box Size/cm | 20GP/40HQ |
| Siding | 3800x383x16 | 3800x420x17/14 | 1500/3600sqm |
|
Core material |
Polyurethane,40kg/m3 |
Fireproof | B1 B2 |
|
Panel weight |
3.5~3.7kg/m2 |
Port |
QINGDAO |
|
R-VALUE |
0.55 m2*k/w |
Payment |
T/T,L/C |
|
Heat conductivity |
0.024 w/m*k(in theory) |
Brand |
DIBAIER |
|
Density |
40- 60 (kg/m3) |
Dimensional stability |
≤ 1.5% |
|
Compressive strength |
200 - 270 (kpa) |
Room temperature |
-196℃ +120℃ |
|
Water absorption |
≤3 % |
Oxygen index |
≥26 |
Product Advantages
Sandwich panel installation process
Step 1: Preparation Phase
When the ordered metal siding and its accessories are included in the future, it is necessary to prepare the necessary items for installing the board and accessories, such as shrinkage screws, dovetail nails, pistol drills, air nail guns, marking pens, tape measures, rubber hammers, and cutting machines.
Step 2: Install the accessory base
Before installing , the base of the board accessories should be installed, mainly including starting parts, closing parts, edge wrapping, middle seams, and internal and external corners.
Step 3: Install the board
After installing the base of the accessories, install the pu wall cladding horizontally from top to bottom, with the female mouth facing down and the male mouth facing up. After the first plate is installed, use Wall plug or dovetail nails to fix it on the wall (fix a nail every 60cm), and then aim the female opening of the second plate at the male opening of the first plate downward to insert tightly. At the same time, use a rubber hammer to slightly buckle the interface of the two plates to ensure that the connection between the two plates is sufficient and tight, and then use Wall plug or dovetail nails to fix the second plate on the wall, Finally, install the remaining panels using the same method.
Step 4: Install the accessory cover plate
After all cladding board are installed, tighten the accessory cover plate vigorously
of Press under the base. If it is a component of the same material, it can be fixed to the wall with screws and finally sealed with waterproof glass adhesive.
Step 5: Tear off the protective film
Company Information
FAQ
Q: What is Foreign Trade-Express?
A: Foreign Trade Express is a one-stop intelligent foreign trade network marketing SaaS system platform.
Q: May we visit your factory?
A: Sure, you're welcomed to our factory any time.
Q: Can we get samples?
A: Sure.We can supply the free samples
Q: How long can we expect to get samples?
A: Samples will be sent out within 3-5days.
Q:Can we order products of different colors?
A: Sure.We can produce according to the customer's requirements.
Q: What is the delivery time?
A: 3-5days .Customized products 15-30 days.
Q: What is the terms of payment?
A: T/T,L/C,all support.
Q:What's your MOQ
A: Single color 100 m² .Double color 200 m².
Q: How do you check all the goods in the production line?
A:We have spot and finished product inspection.
Hot Tags: pu wall cladding panels polyurethane foam thermal, China pu wall cladding panels polyurethane foam thermal manufactures, suppliers, factory, sendvici panel, aerocon panel partition, puf panel partition wall, fiberglass sandwich, sandwich panel pvc, aerocon panel house construction
