Decorative Sandwich Wall Cladding Panels

Decorative Sandwich Wall Cladding Panels

Product introduction

The surface of decorative sandwich wall cladding panels is a colored embossed decorative metal plate treated with a special layer, the middle layer is a rigid high-density polyurethane foam thermal insulation layer treated with flame retardant, and the bottom layer is a thermal insulation layer. Moisture-proof aluminum foil protective layer. Because the wall panel itself has the characteristics of thermal insulation, waterproof and flame retardant, light weight and earthquake resistance, convenient construction, sound insulation and noise reduction, green environmental protection, beautiful and durable, and because the panel assembly method is simple and practical, it is not limited by the seasonal environment, so It is very safe and convenient to install and use, and it is suitable for all seasons. This innovative exterior wall insulation decorative panel highlights its absolute advantages.

Product advantage

Simple installation

The installation of external prefab sandwich panel is very simple without too much technical content and is not affected by weather and season. External prefab sandwich panel shortens the construction period directly and save the labor cost.

 

Elegant appearance

Using this kind of decorative prefab sandwich panel can improve the appearance of the old building grade. Dibaier has a variety of patterns and hundreds of colors to choose from, these panels can also change the old appearance of the original building,and effectively enhance the architectural grade .Decorative prefab sandwich panel is widely used in hotels, villas, residential areas, schools and so on.

 

Environmental protection,and construction safety

Due to the use of finished product installation to reduce the site debris pile and dust and?construction period is short. Because of the low construction noise, the process of old building renovation will not cause too much impact on the office and life of people in and around the building.

How to install decorative insulation sandwich panels (DIY)?

Installing decorative siding is an easy task with exterior sandwich wall panels, It's as simple as putting together blocks.Please remember "The first rule about decorating is that you can break almost every other rule."

 

Before you begin, the essentials you will need include:

1. decorative insulation sandwich panel

2. Accessories

3. Tape measure

4. Handsaw/chainsaw

5. Laser Level

6. Pistol Drill

7. Electric hammer

8. Styrofoam Decorators caulk

9.Plastic expansion tube

10 Wood screws

11. Pen and paper

12.Calculator

Step 1: calculate the number of decorative siding needed

 

First measure the area of the wall to be decorated and calculate the number of panels. The effective width of the wallboard is 38.3cm, and the number of wallboards required can be known by calculating the wall area. At the same time, because of the fixed size of the board, some material waste rate needs to be added to ensure sufficient material.

 

Step 2: Calculate the type and length of the accessories used for the wall panel

 

Before installing insulation panels, you need to decide how the panels will connect. You can use the starting piece, the middle joint piece, and the closing piece of this kind of wallboard for connection. These accessories will not affect the decorative effect of the wallboard, and at the same time can ensure that the wallboard is very stable during installation. Plan the plug-in method and location of accessories. And mark it with a pen.

 

Step 3: Prepare the Wall Panels

 

Before installation, the insulation panels need to be prepared. Cut the insulation panels to size with a hand saw and leave to dry to ensure that the bonding area is dry and smooth.

 

Step 4 Prepare accessories

 

Cut the accessories according to the length of the wall with a hand saw.

 

Product process

Raw materials→Knurling→Forming→Composite foaming→Cutting→Finished products

 

Company profile

Jinan Dibaier environmental protection materials Co., Ltd. is a high-tech enterprise, which includes the design, development, manufacture, sales and service of the products such as metal carving board, active room and sentry box. Dibaier new wall material has the characteristics of good heat insulation, noise reduction, light weight, high strength, simple construction and corrosion resistance. It also has the appearance of beautiful appearance, reusable, long service life and good weather resistance. In the development of new wall materials, we will uphold the new business philosophy of "serving the society, energy saving and environmental protection, convenient and efficient, professional and specific". With excellent team and advanced production equipment.

 

 

FAQ

Q: Which payment form you can accept?

A: T/T, L/C, PayPal etc. We accept any convenient and swift payment term.

Q: Do you have the test and audit service?

A: Yes, we can assist to get the designated test report for product and the designated factory audit report.

Q: What’s your term of the delivery?
A: Our ordinary delivery term is FOB. We also accept EXW, CFR, CIF etc. We’ll offer you the shipping charges and you can choose the one which is the most convenient and effective for you.

Q. How long can I expect to get the prefab sandwich panel sample?

A: 3-5 working days for prefab sandwich panel samples.

 

Hot Tags: decorative sandwich wall cladding panels, China decorative sandwich wall cladding panels manufactures, suppliers, factory, insulated precast concrete wall panels, fiberglass honeycomb sheets, coolroom panel, pu panel roofing, sandwich panels, eps cement wall panel