Polyurethane sandwich panel is a relatively good building material with many advantages. Generally, building materials need to be installed, and polyurethane sandwich panel is no exception. Next, I will introduce how to install polyurethane sandwich panel.
First of all, construction preparations must be made before installation, such as personnel, materials, etc., must be prepared in advance. Secondly, before installing the PU board on the wall, it is necessary to check whether the verticality and horizontality of the wall purlin installation meet the requirements, and the verticality of the wall frame column does not meet the requirements. Then, before installing the polyurethane wall panel, install the water retaining plate at the bottom of the board and the water retaining plate at the bottom of the window. The connection between the water retaining plate and the column beam of the wall frame should be fixed with self-tapping screws.
The other is the connection between the polyurethane wall panel and the ground, horizontal connection: the other end of the polyurethane sandwich panel that is fixed to the ground is fixed with a round hole and a steel frame, and the connection port between the two panels is aligned. If there is a gap in the connection port, you can use insulation Strips are stuffed. Vertical link: The gap between the board and the board needs to be fixed with the special middle groove for the polyurethane wall panel.
The above is basically the installation process of polyurethane sandwich panels. Of course, when installing, try to choose experienced masters as much as possible, so as to ensure the quality of the installation as much as possible.







