Metal Panels Fabricated For Aluminum Roofing Panel
Key selling points overview Say goodbye to the pain points of traditional tiles such as leakage, heaviness and poor heat insulation! This PU core material roof tile takes high-performance polyurethane (PU) as its core and integrates a multi-layer composite structure to create a "protective...
Key selling points overview
Say goodbye to the pain points of traditional tiles such as leakage, heaviness and poor heat insulation! This PU core material roof tile takes high-performance polyurethane (PU) as its core and integrates a multi-layer composite structure to create a "protective barrier" that is both aesthetically pleasing and powerful for your building. It is suitable for all scenarios of building roofs and has a service life of over 25 years!
Core Advantages of the Product
Redefining the standards for roof protection
Polyurethane (PU) core material, the double champion of heat insulation and waterproofing
The product adopts high-density polyurethane foam core material, which is currently recognized as one of the highly efficient thermal insulation materials. The closed-cell rate of the core material is over 95%, which can effectively block the transfer of external heat. In summer, it can lower the indoor temperature by 5-8℃, and in winter, it can reduce the loss of heat, saving more than 30% of air conditioning and heating costs annually. Meanwhile, the PU core material itself has excellent waterproof performance. Combined with the special waterproof coating on the surface, it forms a double waterproof guarantee. After being immersed in water at a depth of 1.5 meters for 24 hours, there is no leakage, completely solving the problem of leakage at the joints of traditional tiles.
Lightweight and high strength, wind and pressure resistant, safer
Compared with traditional earthenware tiles (about 40kg/㎡) and cement tiles (about 35kg/㎡), this PU core material roof tile weighs only 8-10kg/㎡, significantly reducing the load on the building roof. It is particularly suitable for scenarios with load-bearing restrictions such as old house renovations and light steel structure buildings. Despite its light weight, it has a compressive strength of up to 15MPa and a flexural strength of ≥3MPa. It has been tested by authoritative authorities and can withstand strong winds of up to level 12 and hail impacts (no damage when hit by a 50mm diameter hail). It performs exceptionally well in areas prone to severe weather such as typhoons and heavy rain.
Weather-resistant, wear-resistant and anti-aging, providing 25 years of long-lasting protection
The surface layer is coated with imported ASA weather-resistant resin, which features extremely strong UV resistance, acid and alkali resistance, and aging resistance. After artificial accelerated aging tests, simulating 25 years of outdoor environment use, there was no cracking, fading or powdering on the surface, and the color remained bright and lasting. Meanwhile, the coating hardness reaches H-level, which is wear-resistant and scratch-resistant. It can withstand daily trampling and impact from debris, and remain intact even on the factory roof that is frequently inspected by personnel.
Easy to install, saving time, effort and worry
The product adopts a modular design, and the size of each piece can be customized (standard sizes: 4000×1000mm, 8000×1000mm). It is lightweight and easy to assemble, without the need for large hoisting equipment. A team of 2 to 3 people can complete the installation, and the installation efficiency is over 60% higher than that of traditional tiles. Meanwhile, the tiles are equipped with dedicated fasteners that closely adhere to the roof base to prevent loosening and falling off. Later maintenance only requires regular cleaning of surface debris and does not need frequent inspections.
Why do people in the know all choose PU core material roof tiles?
Three core breakthroughs
Breakthrough 1: PU core material + Triple protection, meeting both waterproof and heat insulation standards
Unlike the traditional "single-layer protection" of tiles, we adopt a triple composite structure of "ASA weather-resistant surface layer + high-density PU core material + glass fiber reinforced base layer". Among them, the PU core material is the key - with a closed-cell rate of over 95%. It not only acts like an "insulation blanket" to block heat, reducing the temperature on the top floor by 5-8℃, but also acts like a "waterproof shield" to prevent rainwater from seeping in. After being tested by national authoritative authorities, there is no leakage at all after being immersed in water at a depth of 1.5 meters for 24 hours, completely saying goodbye to the embarrassment of "leaking every time it rains".
Real user feedback: Mr. Zhang from Zhejiang (villa owner) : "In the past, every rainy season, I was worried about water leakage and the walls got moldy." After changing to this PU tile, during the typhoon season and the rainy season last year, not a single drop of water seeped into the house, and the top floor in summer was much cooler!"
Breakthrough 2: Lightweight yet super strong, suitable for both old and new houses
The weight of traditional terracotta tiles and cement tiles is as high as 35 to 40 kilograms per square meter, which many old houses and light steel structure buildings simply cannot bear. This PU core material roof tile weighs only 8-10 kilograms per square meter, which is less than one-third of the weight of traditional tiles. It can be directly laid without reinforcing the roof and is easily adapted to various scenarios such as old house renovation, self-built houses, and factories.
Even more surprisingly, it is "light but not brittle" - with a compressive strength of 15MPa, it remains as stable as a rock under a 12-level typhoon, and shows no cracks after being hit by a 50mm diameter hail. Its wear resistance reaches H-level, and it is not afraid of damage even when stepped on during daily maintenance, with a maximum safety factor.
Breakthrough 3: No fading or aging for 25 years, always maintaining a high level of appearance
Roof tiles should not only be durable but also good-looking! The surface layer is made of imported ASA weather-resistant resin, which has undergone a 2,500-hour artificial accelerated aging test (equivalent to 25 years of outdoor use). The color remains bright, without fading, powdering or cracking. Whether you prefer the retro style of the antique blue tiles, the elegant style of the cinnabar red tiles, or the simple style of the flat gray tiles, 12 styles and 8 color combinations can meet your needs and are suitable for various styles such as villas, ancient buildings, and commercial buildings.
Full coverage of applicable scenarios
Villas and luxury residences
A variety of retro and modern styles are available, which can be matched with architectural styles to enhance the grade. At the same time, they have excellent heat insulation and sound insulation performance to ensure the comfort of living.
01
Industrial plants
The lightweight and high-strength features are suitable for large-span factories. The heat insulation performance reduces the cooling cost of workshops. The wear resistance and weather resistance facilitate later maintenance.
02
Restoration of ancient buildings
Customized ancient-style designs are provided to restore the charm of traditional architecture. Meanwhile, the waterproof and anti-aging properties of PU core materials solve the problem of leakage and easy damage in ancient buildings.
03
Rural self-built houses
Easy to install, saving labor costs, with remarkable waterproof and heat insulation effects, suitable for the complex climate environment in rural areas, and no need for frequent replacement during long-term use.
04
Commercial complex
Customizable uniform colors and styles are available to enhance the overall aesthetic appeal of commercial buildings. At the same time, it features excellent wind and pressure resistance to ensure public safety.
05
After-sales service and purchasing guide
After-sales service commitment
• Warranty Service: The product comes with a 5-year free warranty.
• Logistics guarantee: Global logistics distribution, dedicated line transportation can be coordinated for remote areas.
Procurement Instructions
• Specification customization: We support customization of size, style and color. The customization cycle is 7 to 15 working days. Design requirements need to be provided in advance.
• Sample Application: Samples can be applied for free. You only need to bear the express delivery cost. The quality of the samples is consistent with that of the batch products.
• Bulk purchase: Wholesale prices are available for purchases of 200 square meters or more. For specific prices, please contact customer service for consultation. We support signing formal purchase contracts to protect your rights and interests.
FAQ
01.How long is the general service life of roof panels?
02.How is the waterproof performance of the roof panels? Will there be a leakage problem?
03.Is the installation of the roof panel complicated? How long does it take to complete?
04.How is the heat insulation/heat preservation effect of the roof panels? Can energy consumption be saved?
05.Are roof panels suitable for harsh outdoor environments? (Such as typhoons, hail, seaside)
06.Is there a warranty service after purchase? Is the later maintenance troublesome?
Hot Tags: metal panels fabricated for aluminum roofing panel, China metal panels fabricated for aluminum roofing panel manufactures, suppliers, factory
