Decorative Wall Panels

 

Decorative wall panels has good toughness, nail resistance and external impact resistance. It can be cut arbitrarily according to different engineering design and process requirements, and the shape can be changed after bending. Metal carved board will not be brittle and not easy to be scratched. Metal carved board Wholesale, resistant to acid and alkali corrosion and water vapor erosion, low thermal conductivity, self-extinguishing and flame retardant, reaching the flame retardant standard, which can effectively delay the spread of fire.

 

As a new sunrise product in the construction industry, decorative wall panels have changed the current form of China's building insulation and coating fields under the environment of vigorously promoting the implementation of building energy conservation. It will be impossible to realize semi-finished insulation and coating products directly on the assembly line. Controlled manual construction becomes mechanized and automated production, changing complex manual on-site construction into simple on-site installation. The choice of exterior wall construction technology directly affects the decorative effect, thermal insulation performance and construction and installation cost of the building.

Metal carved decorative wall panels refers to the organic compounding of EPS, XPS, polyurethane, rock wool or inorganic foaming materials and various shapes and colors of metal decorative boards or inorganic pre-painted decorative boards in the factory to realize the prefabrication of products. Standardization, standardization, diversification of combinations, factory production, assembly of construction, to achieve the purpose of integrating thermal insulation and decoration functions. Metal carved panels are essentially just a concept, because as long as thermal insulation is combined with any material, it can be called an integrated thermal insulation panel, because any effect can be made by changing its panel material and finish coating.

 

 

What are the construction installation advantages of decorative wall panels?

 

Decorative wall panels is an ideal new building material. It has the advantages of good integrity and high safety of traditional reinforced concrete slabs, but it also overcomes the shortcomings of heavy concrete slabs and cumbersome construction, and meets the requirements of the new generation of buildings for light weight and The new requirements of high efficiency, energy saving and environmental protection can also achieve ideal and economical construction results on structures with high safety requirements such as bridge engineering.

There are many models and specifications of metal carved panels. According to different fields of use, there are certain requirements and differences in materials, workmanship and performance parameters. But what they have in common is that they use a one-time molding casting process. The finished product has good integrity, good rigidity and strength, and can meet the requirements of road asphalt construction with high safety and earthquake resistance requirements and large spans.

Compared with the same type of plates, it has the following significant advantages: the source of materials is wider, it is convenient for large-scale and continuous production, and its quality can be guaranteed more reliably; steel is a recyclable material, so it is more in line with Environmental protection requirements; the surface can be treated with various styles of finishes according to requirements, and the appearance effect is better; the comprehensive mechanical properties are excellent, and can meet the contradictions of other materials with their own shortcomings;

 

1. Laying out, according to the requirements of the design drawings and geometric dimensions, straighten most of the surface to be inlaid with metal panels, set squares, find rules, and conduct actual measurement and setting out to determine the size and quantity of decorative wall panels .

2. Fix the skeleton connectors. The horizontal and vertical rods of the skeleton are fixed through the connectors and the structure. The connectors and the structure are fixed with expansion bolts. During construction, draw lines at the bolt positions and open holes according to the lines.

3. Fix the frame. The frame should be installed after anti-corrosion treatment. It requires accurate position and firm combination. After installation, the center line and surface elevation should be checked comprehensively. Seams need to be handled properly.

4. For the installation of metal veneer, the installation sequence of wall panels is to start from the first panel at the lower part of the first vertical row at the edge of each wall, and install it from bottom to top. Install the second row. After installing and laying 10 rows of wallboards, the hanging wire should be checked once, so as to eliminate the error in time.

 

 

Features and advantages of metal carved decorative wall panels

 

There are many options for the exterior wall of the sentry box. Today, the editor will recommend to you the choice of most users, metal carved decorative panels. The sentry box made of it, whether it is a public security sentry box or a sales booth, has good quality, heat preservation and decorative effects.
Metal carved decorative panels have excellent thermal insulation performance, metal carved decorative panels can be heat-insulated, which is determined by the stability of its chemical and physical structure, and the public security police booths made of metal carved decorative panels also have good thermal insulation Insulation performance.
The material of the metal carved decorative board security sentry box has high strength compression resistance and noise insulation performance. Because the physical structure of the metal carved decorative board is closely connected, and the board wall has no gaps, its strength is very high, which can be compared with the steel structure sentry box. Therefore, this kind of high-strength metal carved decorative board can maintain its performance even if it works outdoors and withstands wind and sun for a long time.

The metal carved decorative board has high hardness, high density, and good water and moisture resistance. The metal carved board is made of galvanized board, tin foil, and polyurethane. The security police booth made of this material will be relatively light, easy to carry, and has high hardness. At the same time, because its structure contains polyurethane, its water absorption rate is very low, and it can prevent moisture and penetration.
Metal carved decorative panels are durable and eco-friendly. Metal carved decorative panels are not easy to decompose and will not produce harmful decomposition products, so they will not pollute the environment. It is a good choice to make metal carved decorative panels into security guard boxes.

 

 

Q1: What is your company,a manufacturing or a trading company?

A:Our company was founded in 2018,is a manufacturing and trading company

 

Q2:What’s your main products?

A:Our main products are sandwich panels,decorative wall panels.

 

Q3:What is the quality assurance you provided and how do you control quality?

A: We ensure product quality through systematic testing with technically advance equipment.Our raw materials only get from large steel companies including Bao Steel Group,GuanZhou Group,We also welcome you to our factory to supervise the manufacture of products.

 

Q4:Can I get some samples for free?

A: Yes,you can get the samples for free,but you should take the freight charge.

 

Q5:What payment way you can accept?

A:We can accept T/T

Hot Tags: decorative wall panels, China decorative wall panels manufactures, suppliers, factory, aluminum exterior wall cladding, pvc wall covering, steel gypsum panel, internal stone cladding, rust wall panels, metal panel cladding in revit