Fire Resistant Metal Siding
Metal fire resistant metal siding, also called polyurethane foamed metal decorative panels, are new building decoration materials that have just emerged in recent years. The surface is Al-Zn Coated Steel Sheet with embossed treatment; the middle layer is high-density polyurethane foam thermal insulation layer that has been flame-retardant treatment, and the bottom surface is an aluminum foil protective layer that plays a role of heat insulation and moisture prevention .
Products Description
Metal fire resistant metal siding, also called polyurethane foamed metal decorative panels,are new building decoration materials that have just emerged in recent years.
The surface is Al-Zn Coated Steel Sheet with embossed treatment;the middle layer is high-density polyurethane foam thermal insulation layer that has been flame-retardant treatment,and the bottom surface is an aluminum foil protective layer that plays a role of heat insulation and moisture prevention .The wall panel itself has the characteristics of heat preservation and heat insulation, waterproof and flame retardant,light weight and earthquake resistance, convenient construction, sound insulation and noise reduction,green environmental protection, beautiful and durable. At the same time, the board body assembly method is simple and practical.
Therefore, the product has been widely promoted in recent years.
Product Structure
Surface: 0.3 mm Al-zn alloy coated steel sheet (Al 55%, Zn 43%)
Middle: 16mm PU foam
Back : Aluminium foil paper
Size: Length (3000mm-6000mm) * Width:380mm * Thickness: 16mm
Weight: 3.7kgs/sqm
Product Advantages
1. Decoration & beautify
Free combination of different color with different pattern can produce hundreds of styles, make your building much more attractive to your customers.
2. Thermal &; Insulation
Thermal Conductivity: 0.021 W/(m·K)
Thermal resistance: 0.648 (m2·K)/W
3°~5° difference inside & outside after using fire resistant metal siding.
3. Water proof & Fire proof
It is the basic Characteristic for exterior wall panel, for the surface is Galvanized steel sheet, inner side is Aluminium foil paper, good water resistance & fire resistance.
4. Energy-saving
Energy saving: air condition usage=1/3–1/5 energy before install panel
16mm sandwich panel =500mm common brick=1200mm mortar
5. No rust, No fade, Long lifetime.
Al 55% + 43% Zn Alloy steel sheet on the panel surface! This good chemical performance identified by World & Steel Institute make the sandwich panel lifetime more than 40 years.
6. Light weight
Weight 3.7kgs/sqm, lighten building self-weight, so very hot selling for steel structure building, PEB house.
7. Easy installation
Just insert one by one and fix by screw, very easy!
About 30 sqm per person per day average, so widely used for speed house.
8. Eco-friendly
Dry construction, no need water, no need concrete, no dust, no, Pollution, no noise.
9. Easy Maintenance
Self-cleaning by rain or water
Sandwich panel installation process
How to check whether the installation of light steel villa metal siding panels is firm?
During the construction of light steel villas, the metal carved prefabricated exterior wall panels are often pasted on the wall, and once they are laid, they will not be removed again unless they need to be replaced with new ones. And many users are also very concerned about whether the paving is firm or not. Once it is not firm, the consequences are very serious, not only will it fall off suddenly, causing danger, but once it is not firm, it has to be re-paved. Therefore, it is necessary to check whether it is firm in time after the construction is completed. So what method can be used to check whether the paving of the board is firm? It is mainly judged from the following points:
1. First of all, we can increase the temperature near the metal carved prefabricated exterior wall panels to see if the adhesive of the carved board will lose its adhesion due to the influence of high temperature;
2. Immerse the metal engraved prefabricated exterior wall panels in water to judge whether the sealing of its installation is good;
3. Use gravity to experiment on the metal carved prefabricated exterior wall panels to see if it will fall off due to gravity.
After the construction is completed, be sure to check all aspects in time. The metal carved prefabricated exterior wall panels must be firm during the construction process and cannot fall off. According to the above method, you can check whether the board is firm in time. This requires the construction personnel to be careful when installing. Inspection work after installation must not be left behind. Every detail of the board may be related to the entire construction effect.
Company Information
FAQ
1. What's Your Advantage?
A: Honest business with competitive price and professional service on export process.
2. How I Believe You?
A: We consider honest as the life of our company, we can tell you the contact information of our some other clients for you to check our credit. Besides, there is trade assurance from Alibaba, your order and money will be well guaranteed.
3.Can You Give Warranty of Your Products?
A: Yes, we extend a 100% satisfaction guarantee on all items. Please feel free to feedback immediately if you are not pleased with our quality or service.
4. Where Are You? Can I Visit You?
A: Sure,welcome to you visit our factory at any time.
5. How About the Delivery Time?
A: Within 15-35 days after we confirm you requirement.
6. What Kind of Payment Does Your Company Support?
A: T/T, 100% L/C at sight, Cash, Western Union are all accepted if you have other payment,please contact me.
Hot Tags: fire resistant metal siding, China fire resistant metal siding manufactures, suppliers, factory, wooden pvc wall panel, restaurant wall panels, wooden cladding panels, modern wainscoting, brick wall cladding, wood partition panels
