Fire Resistant Decorative Wall Panels

With the continuous improvement of environmental protection and environmental protection requirements, the insulation technology of materials used in industrial buildings has also been increasingly strengthened, especially the requirements for fire resistant decorative wall panels. However, at the same time, there were also some "low-end" products on the market.

Good quality wall panels have good thermal insulation properties. The lower the thermal conductivity, the thinner the design thickness needs to be. Insulation products with thermal conductivity greater than 0.045Wm2K are basically unable to meet the requirements of high energy-saving buildings. The excellent thermal insulation performance of fire resistant decorative wall panels can last as long as the building.

Good quality wall panels have good dimensional stability. If poor quality wall panels are used in projects, they are prone to warping and deformation, leading to cracks and water seepage on the outer surface.

Good quality wall panels have good waterproof and moisture-proof properties. Generally, the thermal insulation performance of thermal insulation materials will drop sharply after absorbing water. Therefore, the thermal insulation materials used in the project should have low water absorption, and the water absorption rate of polyurethane is very low. Now we know that many materials such as rock wool boards, phenolic boards, insulation mortars, etc. are highly water-absorbent materials. In fact, their insulation levels are far from theoretical.

Not only that, we also have very high requirements for the security of single boards. Since the exterior wall insulation decorative board and its facing layer need to be synthesized at one time, gluing cannot be used, but the layers must be tightly bonded together.

Of course, there are many factors to judge the quality of metal wall panels, far beyond the above points. When purchasing wall panels, you must first choose a metal carved board manufacturer. The wall panels of Dibaier Environmental Protection Materials Co., Ltd. are of good quality. The price is also well received by everyone.

The fire resistant decorative wall panels on the exterior wall are not only beautiful, but also have various patterns and have good thermal insulation and decorative effects. Introduce its installation steps:

1. After the main frame structure is completed, measurements, layout drawings, and wall panels will be processed according to the design requirements and actual site conditions.

2. An installation construction plan or operation instruction should be prepared before installation. The construction plan should be approved by the engineer, and the operation instruction should be approved by the technical person in charge.

3. The metal carved fireproof decorative wall panels have been transported to the construction site, stacked according to quantity, and inspected and verified in all aspects according to the design requirements and specifications, including quantity, specifications, models, thickness, appearance quality, etc. Wall panels that meet the requirements and do not meet the requirements should be returned immediately, and the use of unqualified products in the project is strictly prohibited.

4. Find the elevation according to the design requirements, pop up the horizontal line on the inclined beam, accurately position the embedded parts according to the panel plan, find the center line of the embedded parts, and lay the lines well.

5. The mechanical equipment used for wall panel installation has entered the construction site, has been inspected, repaired and maintained, and is in good condition. The tools required for wall panel installation are ready.

The installation of metal engraving fireproof decorative wall panels is the first step in our use, so it is very important. We shouldn't be careless. The manufacturer will provide instructions when we install it. We need to install according to the instructions to reduce the occurrence of failures. After the installation is completed, we must conduct repeated inspections.

Q: How to install the fire resistant decorative wall panels?
A: Easy. Screw the decorative outdoor wall panel onto steel/wooden frame, then apply the accessories to the corner/connecting areas. Done.

Q: Do you accept small orders?
A: Yes. If you are a builder, or small retailer or starting up business, we are definitely willing to grow up with you. And we are looking forward to co-work with you for a long term relationship.

Q: Can you make the price cheaper?
A: We always take our customer's benefit as the top priority. Price is negotiable under different 

conditions, and we are assuring you to get the most competitive price.

Hot Tags: fire resistant decorative wall panels, China fire resistant decorative wall panels manufactures, suppliers, factory, trusscore panels, shower wall covering, wall laminate sheets, thin shiplap paneling, 3d accent wall, external wall panels