Exterior Decorative Metal Carved Siding Panel

The metal carved wall siding panels integrates the metal wall insulation decorative board and the metal embossed fireproof heat insulation board. It is an aluminum foil protective layer.

The inner layer of the metal carved board is fire-resistant polyurethane, and the fire rating can reach B1 level. Since polyurethane is a hydrophobic material with low affinity for water, all metal carved boards can play the role of waterproof and anti-seepage, and the metal Carved panels will not produce formaldehyde radiation and other problems of traditional building materials, and will not harm the human body.

 

 

 

 

 

 

 

 

Installation precautions:

1. When handling and loading and unloading products, as well as logistics and transportation, be careful to avoid collision and damage to the board. 2. The environment where the board is placed should be ventilated and dry, and the site must be flat and solid; when using square wood pads, the distance between the square wood should not be too large to ensure that the product will not be deformed due to its own gravity. 3. When the metal carved board is cut and used, the surface of the board and There will be cutting iron filings attached to the incision, which is easy to rust. The remaining iron filings should be carefully removed. Wear protective gloves when cleaning to avoid scratching your hands. 4. Pay attention to protect the board surface during construction, avoid scratches, impacts, and tools touching the board 5. Avoid construction work when it rains: During the construction process, prevent the inside of the board from contacting with water to prevent internal water from corroding and rusting from the surface , reducing its service life

FAQ