Aluminum Decorative Panel For Exterior Wall
The surface of the metal carved board is a high-quality colored embossed decorative metal plate treated with a special layer. The middle layer is a hard high-density polyurethane foam insulation and heat insulation layer treated with flame retardancy, and the bottom layer is an aluminum foil protective layer that plays a role in thermal insulation and moisture prevention.
Products Description
Metal carved panel/aluminum decorative panel for exterior wall decoration Hot-dip galvanized steel sheet Core material
Rigid foamed polyurethane material Bottom layer
Hard moisture-proof aluminum foil paper
metal sidings also have good energy-saving and thermal insulation effect . Imported equipment are adopted to produce such metal sidings. With high quality, high standards, and stable performance, Shanghe metal sidings are the wise choice for energy-saving renovation of exterior walls.
|
Test Items |
Test Results |
|
Surface density(core material) |
42kg/m3 |
|
Compressive strength(core material) |
295kpa |
|
Thermal Conductivity |
Average temperature:10℃ 0.022W/(m-k) |
|
Average temperature:25℃ 0.024W/(m-k) |
|
|
Water absorption |
0.8% |
|
Vertical tensile strength(siding) |
1.6kpa |
|
Flexual capacity(siding) |
Vertical 5.44Mpa |
|
Horizontal 3.88Mpa |
|
|
Salt spray resistance(steel sheet) |
No damage within 500h(neutral salt spray) |
|
Acid resistance(steel sheet) |
No abnormality within 24h(5% sulfuric acid) |
|
Alkali resistance(steel sheet) |
No abnormality within 24h(5% sodium oxychloride) |
|
High temperature resistance(steel sheet) |
600℃ |
|
Percentage of close area(core material) |
99.70% |
|
Al-Zn coating content |
55-57g/m2(55% aluminum,43%zinc) |
|
Wind pressure resistance(siding) |
10kpa the sample is not damaged |
|
Horizontal firing(core material) |
HF-1 |
|
Combustion performance |
Grade B |
|
Heat transfer coefficient |
1.50W (m2.K) |
|
Airborne sound insulation |
25 dB |
|
Formaldehyde emission(siding) |
No-detected |
|
Fluorescent UV lamp aging(steel sheet) |
No abnormality in appearance |
Products advantages
The metal carved aluminum galvanized steel decorative wall panel uses environmentally friendly raw materials (such as the inner polyurethane layer and the insulation layer inside the refrigerator and air conditioner being the same material), which are non-toxic, odorless, and pollution-free, providing green protection and decoration for the building.
Characteristics of metal decorative insulation board:
1. Thermal insulation, consumption reduction, and energy conservation:
Metal carved panels have excellent thermal insulation properties, and compared to traditional exterior wall insulation and decoration materials, they have excellent cold resistance and thermal insulation performance. It greatly reduces the energy consumption of heating and cooling, thereby saving energy expenditure. The product has a high cost-effectiveness.
2. Convenient installation and cost saving:
The installation method of metal carved boards is simple and fast, and is not limited by seasonal climate and geographical environment, making it suitable for use throughout the year. The significantly shortened engineering cycle not only accelerates the project progress, but also saves construction costs and reduces overall costs. Metal carved panels not only achieve decorative and thermal insulation effects, but also minimize the external wall load and enhance the availability of space and land.
3. Lightweight, land saving, shockproof, and crack proof:
Metal carved boards have light weight, high strength, and good impact resistance. Its lightweight advantage not only reduces the burden on the building itself, but also greatly reduces the impact of earthquakes on the building. This board is installed on a light steel structure building, with strong integrity, earthquake resistance, crack resistance, and sturdy and safe structure.
4. Flame retardant, waterproof and moisture-proof board:
The metal carved board has undergone special treatment and has good flame retardant performance, ensuring safety and worry free.
Traditional exterior wall decoration materials commonly suffer from substrate degradation caused by water permeability and cold penetration, leading to problems such as indoor wall seepage. The excellent self structure of the exterior wall insulation and decoration integrated panel and the compact concave and convex plug-in buckle groove installation method between the panels avoid structural damage caused by rain, snow, freezing, melting, dry and wet cycles. After installation, the worry of water seepage on the wall is eliminated, effectively avoiding the phenomenon of indoor wall mold. Even in severe cold areas, the stable performance of the exterior wall insulation and decoration integrated panel has no worries of water seepage or deformation, extending the service life of the building.
Products application
FAQ
Q: Are you manufacturer?
A: Yes, we are.
Q:Can you produce aluminum decorative panel for exterior wall according to my requirement?
A:Yes, all the design, size, printing and packaging can be done according to customer's request. About any further detail, please feel free to contact us.
Q: Do you offer free samples?
A: Sure,we are glad to send you free samples for your evaluation . But currently we need you to kindly pay the delivery charge on your side if you'd like to have our samples.
Q: What's your MOQ?
A: We can accept smaller quantities if the warehouse has the right stock size.
Q:How long is your delivery time?
A: About 15-25 days.
Q:What specification should I tell you if I wanna get the quotation?
A: 1.Size 2. Application 3. Surface treatment 4. Estimated quantity
Hot Tags: aluminum decorative panel for exterior wall, China aluminum decorative panel for exterior wall manufactures, suppliers, factory, thin wood planks for walls, bathroom paneling sheets, concrete cladding panels, ceiling cladding panels, stone wall panels exterior, durawall panels
