3d Decorative Wall Panels
Metal carved 3d decorative wall panels are light in weight, high in strength and good in impact resistance. Its light weight not only reduces the burden on the building itself, but also greatly reduces the impact of earthquakes on buildings. The plate is installed on a light steel structure building, which has strong integrity, earthquake resistance and crack resistance, and is strong and safe.
Products Description
The metal carving 3d decorative wall panels mainly has the following four core energy-saving technologies: special galvanized steel plate, rigid polyurethane foam. The base plate of the 3d decorative wall panels is made of galvanized steel plate. The surface is "extremely" enhanced by the principle of pressing balance, and the strength of the surface layer is greatly enhanced. To meet the decoration needs of the building, improve the image of the building's facade, and inject new vitality into the appearance of the building. It is more useful to save power for reuse. (The theoretical life of galvanized steel plate is very long, and the recovery rate reaches 99.9%). The middle insulation layer uses rigid polyurethane foam, which is an insulation material with advanced technology and environmental protection requirements in the world. After testing, after 25 years of use of rigid polyurethane foam at high temperature, its thermal insulation performance will drop by less than 3%. The protective effect of the tight combination of aluminum foil paper or glass fiber cloth ensures that the decorative wall panels maintains a long-term, stable and good thermal insulation and energy-saving effect.
The unique planning structure of the energy-saving system of the metal carved board wall completely eliminates the influence of "cold and heat bridges". The unique air layer can regulate the humidity of the wall, effectively avoiding the occurrence of indoor humidity and mildew. Because the metal carved panels are placed outside the building envelope, structural damage caused by wind, sun, rain, snow and other natural elements is avoided, thereby prolonging the service life of the building. The exterior wall decorative board is a new type of building exterior wall decoration and thermal insulation integrated material developed in recent years. The material is composed of polyester paint or fluorocarbon paint, carved aluminum-zinc alloy steel plate, polyurethane insulation layer, and glass fiber cloth; the main application Applied to the exterior wall decoration and energy-saving renovation of various buildings such as gymnasiums, libraries, school and hospital office buildings and villas; the main functions are building decoration, heat preservation and energy saving, heat insulation and sound insulation, waterproof and mildew proof. Process: Industrial workers receive strict training, and the production process is controlled by automated equipment. The disorderly on-site manual operation method is transferred to the standardized and industrialized standard production of the factory. The quality is stable and controllable, ensuring the safety and reliability of the system. Factory production, strictly in accordance with the ISO international quality management system certification standards, perfect product quality system and the industry's most advanced automatic painting production line. Industrialized production, thermal insulation and decoration panels are carefully crafted through 25 processes, the paint surface is pure in color, and the quality is fully guaranteed.
Products advantages
Decorative wall panels is an ideal new building material. It has the advantages of good integrity and high safety of traditional reinforced concrete slabs, but it also overcomes the shortcomings of heavy concrete slabs and cumbersome construction, and satisfies the new generation of buildings. The new requirements of high efficiency, energy saving and environmental protection can also achieve ideal and economical construction results on structures with high safety requirements such as bridge engineering.
There are many models and specifications of decorative wall panels. According to different fields of use, there are certain requirements and differences in materials, workmanship and performance parameters. But what they have in common is that they use a one-time molding casting process. The finished product has good integrity, good rigidity and strength, and can meet the requirements of road asphalt construction with high safety and earthquake resistance requirements and large spans.
Compared with the same type of plates, it has the following significant advantages: the source of materials is wider, it is convenient for large-scale and continuous production, and its quality can be guaranteed more reliably; steel is a recyclable material, so it is more in line with Environmental protection requirements; the surface can be treated with various styles of finishes according to requirements, and the appearance effect is better; the comprehensive mechanical properties are excellent, and can meet the contradictions of other materials with their own shortcomings;
1. Laying out, according to the requirements of the design drawings and geometric dimensions, straighten most of the surface to be inlaid with metal panels, set squares, find rules, and conduct actual measurement and setting out to determine the size and quantity of decorative wall panels .
2. Fix the skeleton connectors. The horizontal and vertical rods of the skeleton are fixed through the connectors and the structure. The connectors and the structure are fixed with expansion bolts. During construction, draw lines at the bolt positions and open holes according to the lines.
3. Fix the frame. The frame should be installed after anti-corrosion treatment. It requires accurate position and firm combination. After installation, the center line and surface elevation should be checked comprehensively. Seams need to be handled properly.
4. For the installation of metal finishes, the installation sequence of wall panels is to start from the first panel at the bottom of the first vertical row at the edge of each wall, and install it from bottom to top. Install the second row. After installing and laying 10 rows of wall boards, the hanging wire should be checked once, so as to eliminate the error in time.
|
Product Name |
3d Decorative Wall Panels |
|
Composition |
Surface：Al-Zn alloy coated steel sheet and high-quantity Nippon paint |
|
Design Style |
Solid color, brick grain, stone grain, wood grain,Marbling or customized |
|
Thickness |
16mm/20mm/25mm/100mm/200mm or as customers requested |
|
Width |
383mm or as customers requested |
|
Length |
5800mm or as customers requested |
|
Weight |
3.45-3.7kg/㎡ |
|
Fire-proof level |
B level |
|
OEM |
Logo，partten and panel size |
|
Warranty |
10years |
|
Advantages |
Fire resistant,Waterproof,Thermal Insulation,Soundproof,Earthquake proof,Eco-friendly,Flame Retardant,Easy Installation. |
|
Application |
Hotel,Villa,Apartment,Building,Hospital,School,Mall,External,Internal,Ceiling,Roofing,Prefabricated House,Container House,Module House. |
FAQ
Q:What's the delivery time?
A: The delivery time depends on the size and quantity of building.Generally within 10 days after receiving the payment.And partial shipment is allowed for big order.
Q:Do you offer service for installation?
A: We will furnish you the detailed construction drawing and the construction manual which could help you to erect and install the building step by step. We also could send the engineer to your local to help you if needed.
Q:How to get a quote from you?
A: You can contact us by email, phone, Alibaba TM, WhatsApp, Skype and so on 24*7 and you will get reply within anytime.
Q:What's your payment term? A: We accept T/T, Western Union, L/C etc.
Q:what services can we provide?
A: Accepted Delivery Terms:CIF,FOB,EXW. Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY; Accepted Payment Type: T/T,L/C,Credit Card,PayPal,Western Union.
Q:How can we guarantee quality?
A: We have our own quality control team and have passed the ISO and SGS/CE certificates which can make sure about the quality of our products. Always a pre-production sample before mass production; Always final Inspection before shipment.
Q:What can you buy from us?
A: PU sandwich panels, EPS panels, 3d decorative wall panels in all various specifications and models.
Q:How long is your delivery time?
A: About 7-14 days, it depends on the quantity you order since we receive your deposit.
Hot Tags: 3d decorative wall panels, China 3d decorative wall panels manufactures, suppliers, factory, wainscoting materials, 3d gypsum wall panels, shiplap wood paneling, death star wall panels, old wood paneling, metal panels for garage walls
