Sandwich Wall Panel For Tiny House

             Metal carved panels are widely used in the exterior walls of houses, renovation of old houses, hospitals, office buildings, steel structure factories and other buildings. Its thermal insulation and fireproof performance is very popular, so metal carved panels play a pivotal role in the construction industry.

 

 

         

 

 

         

1. Sound insulation: The core material is polyurethane foam filling, the unique polymer interface of polyurethane, the closed gap, can isolate 98% of the noise.

2. Fireproof: The surface of the aluminum-zinc color-coated steel plate is non-flammable, and the polyurethane core material has a fireproof grade of B1, which can ensure the safety of the building.

3. Waterproof and moisture-proof: The unique letter bayonet structure can prevent water from entering, and the aluminum foil cloth coating at the bottom can isolate water vapor and play a waterproof and moisture-proof role. Even in long-term heavy rain and heavy snow weather, the metal carved board will not be affected.

4. Green and environmentally friendly: Dibaier metal carved board can be disassembled and reused twice, and the service life can reach 30 years+.

 

          Carved sandwich wall panel for tiny house are commonly used building panel products. It not only has good decorative properties and meets people's aesthetic requirements, but also has good thermal insulation and energy-saving properties, making the building more energy-saving and money-saving. Of course in order to get the best results from the panels, it is important to install them correctly. There are some issues that need to be paid attention to before, during and after installation.

 

1. To prepare the special bonding mortar, according to the specified proportion, add the special powdered adhesive to the appropriate water and use an electric mixer to mix evenly, and then start pasting. 8 paint spots.

 

2. Check and deal with the base layer, check the condition of the original exterior wall tiles of the sandwich wall panel construction, no cracking, no powder drop, no sand, no hollowing, no peeling, no lime cracking points and no old old ones with poor adhesion. coating etc. On the construction wall, according to the design drawing, the vertical and horizontal datum lines are bounced on the wall with ink lines.

 

3. Reinforcement can enhance the tensile strength and anti-deformation ability of the soil mass, and enhance the stability of the building structure to change the soil mass.

 

4. Leave a gap of 15mm between the wall sandwich panel and the board to adjust the installation error. When the decorative board is installed, the deviation between left and right and up and down should not be greater than 1.5mm.

 

5. Do not use too much force when installing the inner anchor and outer anchor, so as to avoid damage to the board surface.

 

 

 

 

 

 

Hot Tags: sandwich wall panel for tiny house, China sandwich wall panel for tiny house manufactures, suppliers, factory