Metal Carved Insulated Sandwich Panels

Quickly install metal carved insulated sandwich panels

Product introduction

As a building insulation material, metal carved insulated sandwich panels breaks the common problem of traditional building materials with single function -- waterproof without heat preservation and heat preservation without waterproof. Once the waterproof layer leaks, the insulation layer loses its heat preservation function. Compared with other single-function insulation or waterproof materials, metal pu insulated sandwich panels has obvious advantages: light bulk density, can reduce the weight of finished products, 30-60% lower than traditional products, metal carved sandwich panels has stable chemical properties, long service life and ideal water impermeability.

Product advantage

Heat insulation, energy saving.Metal pu sandwich panels have good heat preservation and heat insulation characteristics, and has good cold resistance and heat insulation performance compared with the traditional external wall materials. They greatly reduce the heating and cooling energy consumption, thus saving energy bills.

Metal sandwich panels cost less to repair. If the metal insulated sandwich wall panels are damaged, They only need to remove the old plates and reinstall the new plates.

Insulation and waterproof.In terms of heat preservation and energy saving, the structure and site installation mode of the metal foam insulated sandwich panels ensure that the insulation layer of the metal insulated pu sandwich panels will not be damaged due to construction, but also can avoid the cracking of the coating and insulation layer, resulting in rain infiltration, which will lead to the damage of the insulation layer.

Product accessory

Tools/Materials: Electric drill, expansion screw, self-tapping screw, metal carved plate

1. First place the metal carved board on the wall, power on the hand electric drill, and then use the electric drill to punch holes on the wall at the link of the metal carved board.

2. Then install expansion screws to the holes and fix them with self-tapping screws.

3. Finally, another board is placed above the fixed metal carving board, and the groove of another board is inserted into the slot of the fixed metal carving board. Then repeat the above operation.

4. After the installation, the exterior wall decoration is beautiful, heat preservation and heat insulation, fireproof,moistureproof and sound insulation.

Matters needing attention:

Make wall level before installation.

When installing metal carving board also want to find level

Production Workshop

The new fire safety rock wool sandwich panel is made of double-layer high-quality colorful plated thick steel plate or other high-precision profiled metal sheet material as the control panel.

Rotate around 100 degrees, and use the rock wool panel of vertical flocculent chemical fiber as the core board, so that the chemical fiber vertically bisects the left and right double-layer thick steel plates.

The high-quality rock wool panel and the metal material control panel are super-strongly bonded to form a beautiful, flat, rigid and tough engineering building board.

Our exhibition

At present, we have established good partnerships with buyers all over the world. Mainly exported to Southeast Asia, South America, North America, Europe and West Africa. We have a wide range of buyers, builders, dealers and Amazon sellers.We do our best to serve every customer and constantly open up new areas.Looking forward to cooperating with you.

Industry News

Avoiding errors of metal carved insulated sandwich panels installation.

The choice of metal carving sandwich wall panel is very important, which is not only related to the future use but also includes the quality of the material itself.However, due to the lack of expertise, there are many misunderstandings when buying metal carved sandwich panels, which are briefly described below.

1. Some users believe that inorganic insulation is a good product only if it has good hardness and small pore size.There are various misconceptions about insulation materials, including organic and inorganic materials.

2. Metal carved sandwich panels should not be superficial, in the project we should not consider the compatibility and matching of various materials in the exterior wall insulation decoration comprehensive board system, and can not think that the inorganic thermal insulation material of 0.065 can not meet the energy saving requirements of 50%.

3. No matter what the quality is, the price is very cheap as long as it is in line with the price.

4. For some new exterior wall insulation materials, we can not completely deny this insulation technology because of the unqualified quality of the factory.

5. The selection only depends on the thermal conductivity or water absorption as the evaluation basis.

6. In terms of technology, it should not be considered that the thermal conductivity of fully obturator insulation material is very low, so it must be a good insulation material.

7. In the selection, it is recommended to understand the characteristics of various materials and field test methods on the basis of understanding the structure of insulation layer.

FAQ

Q: How long is your delivery time?

A: Generally it is 15-25 days if the goods are in stock.

Q: What is your payment?

A: L/C,D/A,D/P,T/T,Western Union

Q: Are you trading company or manufacturer ?

A: We are factory.

Q: Where is your company?

A: Our company is located in beautifulShandongi,welcome to visit.

Q: How can I contact you?

A: E-mail:wendy@jndibaier.com

Wechat: L15054138757

Q: Do you provide metal carved insulated sandwich panels samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Hot Tags: metal carved insulated sandwich panels, China metal carved insulated sandwich panels manufactures, suppliers, factory, Metal Carved Insulated Sandwich Panel Cladding Systems, sandwich panel warehouse, fiberglass sandwich, puf insulated sheets, puf panel partition wall, pemasangan sandwich panel