Pu Wall Panel

 

Metal pu wall panel mainly have the following four core energy-saving technologies: specially made aluminum zinc plated steel plate, hard foam polyurethane, reflective film, and air layer. I Product Introduction: The surface of Gemei Metal Carved Board is a high-quality colored embossed decorative metal plate treated with a special layer. The middle layer is a hard high-density polyurethane foam insulation and heat insulation layer treated with flame retardancy, and the bottom layer is an aluminum foil protective layer that plays a role in thermal insulation and moisture prevention. Due to the inherent characteristics of insulation, waterproofing, flame retardancy, lightweight and seismic resistance, convenient construction, sound insulation and noise reduction, green environmental protection, aesthetics and durability, as well as the simple and practical assembly method of the wall panel, which is not limited by seasonal environment, installation and use are very safe and convenient, suitable for all seasons. This innovative exterior wall insulation decorative panel highlights its absolute advantages. There are over a hundred combinations of relief patterns and colors. The luxurious and beautiful decorative effect highlights the grade and taste of the building. The simple and flexible disassembly and assembly method makes the replacement of wall design matching easy. This board is suitable for thermal insulation and decoration of exterior walls of newly built brick concrete structures, frame structures, steel structures, lightweight houses, and other types of buildings. It is also suitable for energy-saving renovation of existing buildings, as well as indoor and outdoor decoration. II Material structure diagram: Surface: 0.3-1.0MM aluminum zinc plated, aluminum alloy material, surface paint is high weather resistant polyester paint, electrostatic spray powder. Middle inner core: Made of hard polyurethane foam insulation layer with B1-B3 fire resistance and a density of 42-45kg/m ³， The thermal conductivity coefficient is 0.02, making it the best insulation material on the market, with a thickness of 1.6 cm (equivalent to 5 cm of benzene board), and excellent insulation performance. Back: Made of moisture-proof and heat-insulating aluminum foil, aluminum foil fiberglass cloth, or color coated board. III Product feature four Product parameters note: For special needs, it can be produced to a certain length Packaging instructions

 

A. Before packaging: 3800 * 383 * 16mm (8 sheets/pack) After packaging: 3810 * 420 * 140mm B. Before packaging: 4000 * 383 * 16mm (8 sheets/pack) After packaging: 4010 * 420 * 140mm C. Before packaging: 6000 * 383 * 16mm (5 sheets/pack) After packaging: 6010 * 420 * 90mm D. Before packaging: 3800 * 383 * 16mm (4 sheets/pack) After packaging: 3810 * 420 * 170mm E. Before packaging: 4000 * 383 * 16mm (4 sheets/pack) After packaging: 4010 * 420 * 170mm Remarks: Special specifications, dimensions, and double-sided steel plate wall panels will be separately agreed upon. Domestic packaging: 1. Use kraft paper for moisture-proof and rainproof packaging. 2. Use cardboard boxes for precision packaging. Foreign trade packaging: Use kraft paper for moisture-proof packaging, with the outer layer wrapped in cardboard boxes. VI The installation method is convenient and fast for dry hanging construction, using alloy accessories and screws for installation and fixation, greatly shortening the construction period and saving labor costs compared to traditional materials. Construction advantages: 1. Lightweight - dry hanging installation 2 Fast - short construction period 3 Savings - Construction Costs

 

 

 

Aluminum alloy accessories

 

 

1. Good insulation performance, which can significantly reduce heating and cooling energy consumption and save energy expenditure

 

2. Fire retardant, triple protection, no toxic gas generation

 

3. Waterproof and moisture-proof, to avoid structural damage caused by rain, snow, freezing, melting, etc. After installation, the possibility of water seepage on the wall can be removed

 

4. Insulation and sound insulation layer, sound insulation and noise reduction, with an independent enclosed bubble structure inside, with good sound insulation effect

 

5. Fast construction, cost saving, simple and fast installation method, not limited by seasonal climate and geographical environment

 

6. Environmentally friendly and durable, pollution-free, with stable chemical and physical structures that do not decompose or mold

 

7. Shock resistant and crack resistant, with light weight, high strength, and good impact resistance, reducing the burden on the building itself

 

8. With strong decoration, the combination of authentic relief patterns and rich colors provides greater space for architectural design to play

 

9. There are a variety of designs and colors, including over 100 varieties such as brick, stone, and marble patterns, and more than 50 colors for you to choose from

 

10. Widely used in various fields, including renovation of old buildings, indoor and outdoor decoration, and various new buildings. It can be used as wall panels, ceiling panels, and decorative panels. 11. It has a long service life and is coated with aluminum zinc steel plates on the outer layer, without considering issues such as rust or peeling.

 

12. Good cost-effectiveness, the cost of this panel project is one-third of that of the pu wall panelcurtain wall project, and the decoration effect is excellent.

 

 

 

Q: Are you manufacturer?
A: Yes, we are.

Q:Can you produce according to my requirement?
A:Yes, all the design, size, printing and packaging can be done according to customer's request. About any further detail, please feel free to contact us.

Q: Do you offer free samples?
A: Sure,we are glad to send you free samples for your evaluation . But currently we need you to kindly pay the delivery charge on your side if you'd like to have our samples.

Q: What's your MOQ?
A: We can accept smaller quantities if the warehouse has the right stock size.

Q:How long is your delivery time?
A: About 15-25 days.

Q:What specification should I tell you if I wanna get the quotation?
A: 1.Size 2. Application 3. Surface treatment 4. Estimated quantity

 

 

Hot Tags: pu wall panel, China pu wall panel manufactures, suppliers, factory, external cladding sheets, decorative paneling, carved wood wall panel, navy panelling bedroom, honeycomb wall panels, designer wall panels